Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCB adapter card with PCIe x4 slot M.2 connector and floppy power cable

JMT

JMT LM-141X-V1.0 M.2 to PCI-E X4 Adapter Card

SKU CH-14E8-VCCEE

Converts an M.2 NGFF M-key slot into a PCI-E x4 connection for desktop or laptop expansion

  • Package Contents1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card 1 x Floppy 4 P
  • Converts M.2 NGFF to PCI-E X4 slot
  • Driver-free operation across Windows and Linux
  • Floppy 4-pin power for stable delivery
  • Fits 2260 and 2280 module lengths
  • Supports up to 4.0 GB/s throughput

M.2 to PCI-E X4 Adapter Card

The JMT LM-141X-V1.0 converts an M.2 NGFF M-key slot into a standard PCI-E X4 female socket. It targets builders who want to install a PCI-E expansion card inside a desktop or laptop that only offers an M.2 Socket 3 interface. The board includes fixed mounting holes for 2260 and 2280 form-factor modules. No software drivers are required for operation.

Fits into a build with an M-key slot

Installation uses the supplied screw and screwdriver to secure the adapter into the M.2 Socket 3 PCIe-based slot. A floppy 4-pin to Molex power cable is included to provide stable auxiliary power for the connected PCI-E card. The adapter is transparent to the operating system and supports Windows, Win CE and Linux without extra configuration.

Replaces a direct PCI-E slot when none is free

This adapter upgrades a system by unlocking an otherwise unused M.2 Socket 3 lane for general PCI-E X4 expansion. The jump is worth it when a builder needs to add a PCI-E 1x or 4x card but lacks an open full-size slot. It does not support M.2 SATA modules or sockets wired for other keyings.

Puncte forte

  • Converts M.2 NGFF to PCI-E X4 slot
  • Driver-free operation across Windows and Linux
  • Floppy 4-pin power for stable delivery
  • Fits 2260 and 2280 module lengths
  • Supports up to 4.0 GB/s throughput

Specificații

BrandWBTUO
ModelLM-141X-V1.0
Package Contents1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card 1 x Floppy 4 Pin to Molex Power Cable 1 x Screw 1 x Screwdriver

Întrebări despre acest articol

What is the maximum data-transfer rate this adapter can sustain?

The card supports data transfer up to 4.0 GB/s over a PCIe x4 link.

How much heat or power draw should I expect when the adapter runs continuously?

The board is passive with no fan; it draws auxiliary power through the included floppy 4-pin to Molex cable for stable operation.

Which M.2 module lengths does the board physically accommodate?

Two fixed mounting holes are spaced for 2260 and 2280 form-factor modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.