暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green PCB adapter card with PCIe x4 slot M.2 connector and floppy power cable

JMT

JMT LM-141X-V1.0 M.2 to PCI-E X4 Adapter Card

SKU CH-14E8-VCCEE

Converts an M.2 NGFF M-key slot into a PCI-E x4 connection for desktop or laptop expansion

  • Package Contents1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card 1 x Floppy 4 P
  • Converts M.2 NGFF to PCI-E X4 slot
  • Driver-free operation across Windows and Linux
  • Floppy 4-pin power for stable delivery
  • Fits 2260 and 2280 module lengths
  • Supports up to 4.0 GB/s throughput

M.2 to PCI-E X4 Adapter Card

The JMT LM-141X-V1.0 converts an M.2 NGFF M-key slot into a standard PCI-E X4 female socket. It targets builders who want to install a PCI-E expansion card inside a desktop or laptop that only offers an M.2 Socket 3 interface. The board includes fixed mounting holes for 2260 and 2280 form-factor modules. No software drivers are required for operation.

Fits into a build with an M-key slot

Installation uses the supplied screw and screwdriver to secure the adapter into the M.2 Socket 3 PCIe-based slot. A floppy 4-pin to Molex power cable is included to provide stable auxiliary power for the connected PCI-E card. The adapter is transparent to the operating system and supports Windows, Win CE and Linux without extra configuration.

Replaces a direct PCI-E slot when none is free

This adapter upgrades a system by unlocking an otherwise unused M.2 Socket 3 lane for general PCI-E X4 expansion. The jump is worth it when a builder needs to add a PCI-E 1x or 4x card but lacks an open full-size slot. It does not support M.2 SATA modules or sockets wired for other keyings.

特長

  • Converts M.2 NGFF to PCI-E X4 slot
  • Driver-free operation across Windows and Linux
  • Floppy 4-pin power for stable delivery
  • Fits 2260 and 2280 module lengths
  • Supports up to 4.0 GB/s throughput

仕様

BrandWBTUO
ModelLM-141X-V1.0
Package Contents1 x PCI-E 4X to NGFF M.2 B+M Key Adapter Card 1 x Floppy 4 Pin to Molex Power Cable 1 x Screw 1 x Screwdriver

この商品に関する質問

What is the maximum data-transfer rate this adapter can sustain?

The card supports data transfer up to 4.0 GB/s over a PCIe x4 link.

How much heat or power draw should I expect when the adapter runs continuously?

The board is passive with no fan; it draws auxiliary power through the included floppy 4-pin to Molex cable for stable operation.

Which M.2 module lengths does the board physically accommodate?

Two fixed mounting holes are spaced for 2260 and 2280 form-factor modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。