Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

KHACHIMO

KHACHIMO FLATPACK 2500 48V 52A 230Vac 53.5V 46.7A power supply

SKU CH-2A9N-ESDXX

Delivers 48 V at 52 A from 230 Vac input with a 2500 W rating and 53.5 V 46.7 A DC output

  • TypeATX
  • Delivers 2500 W for demanding telecom loads
  • Accepts 230 V AC input for standard mains compatibility
  • Provides 48 V DC at 52 A for reliable equipment power
  • Tested working and built to good quality standards

KHACHIMO FLATPACK 2500 48V rectifier

This KHACHIMO FLATPACK 2500 unit is a 48 V rectifier module rated for 52 A output. It accepts 230 Vac input and delivers a regulated 53.5 V DC at up to 46.7 A. The module is supplied new and tested working for Eltek communication power systems.

2500 W capacity and headroom

The rectifier provides 2500 W of continuous DC power for telecom loads that operate within the 48 V nominal bus. It runs out of headroom when the connected equipment draws more than 46.7 A at 53.5 V or when the AC source falls outside the 230 Vac specification.

Puncte forte

  • Delivers 2500 W for demanding telecom loads
  • Accepts 230 V AC input for standard mains compatibility
  • Provides 48 V DC at 52 A for reliable equipment power
  • Tested working and built to good quality standards

Specificații

TypeATX

Întrebări despre acest articol

Will the 2500 W output at 48 V 52 A work with my existing 230 Vac distribution panel?

Yes, the unit accepts 230 Vac input and delivers up to 2500 W at 48 V 52 A, matching standard telecom rectifier shelves.

How can I verify the 53.5 V 46.7 A DC output is present after installation?

Measure the DC terminals with a multimeter; you should read approximately 53.5 V under load, confirming the supply is operating within its rated 46.7 A capability.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.