Wir akzeptieren Kryptowährungen — so können die Coins, die Sie besitzen, echte Hardware kaufen.Zahlen Sie mit Krypto, geben Sie sie für echte Hardware aus. Weltweit kostenloser versicherter Versand ab 399 $. Neutrale Kartons ohne Markenaufdruck, versendet aus Deutschland.Kostenloser versicherter Versand ab 399 $. Ihr Kurs wird 30 Minuten lang gesperrt, sobald die Kasse geöffnet wird.Kurs 30 Minuten gesperrt. Jeder Artikel ist versiegelt, die Seriennummer wird geprüft, und es gilt eine Garantie von 24 Monaten.Versiegelt, 24 Monate Garantie.

Gemerkte Artikel Anmelden

KHACHIMO

KHACHIMO FLATPACK 2500 48V 52A 230Vac 53.5V 46.7A power supply

SKU CH-2A9N-ESDXX

Delivers 48 V at 52 A from 230 Vac input with a 2500 W rating and 53.5 V 46.7 A DC output

  • TypeATX
  • Delivers 2500 W for demanding telecom loads
  • Accepts 230 V AC input for standard mains compatibility
  • Provides 48 V DC at 52 A for reliable equipment power
  • Tested working and built to good quality standards

KHACHIMO FLATPACK 2500 48V rectifier

This KHACHIMO FLATPACK 2500 unit is a 48 V rectifier module rated for 52 A output. It accepts 230 Vac input and delivers a regulated 53.5 V DC at up to 46.7 A. The module is supplied new and tested working for Eltek communication power systems.

2500 W capacity and headroom

The rectifier provides 2500 W of continuous DC power for telecom loads that operate within the 48 V nominal bus. It runs out of headroom when the connected equipment draws more than 46.7 A at 53.5 V or when the AC source falls outside the 230 Vac specification.

Besonderheiten

  • Delivers 2500 W for demanding telecom loads
  • Accepts 230 V AC input for standard mains compatibility
  • Provides 48 V DC at 52 A for reliable equipment power
  • Tested working and built to good quality standards

Technische Daten

TypeATX

Fragen zu diesem Artikel

Will the 2500 W output at 48 V 52 A work with my existing 230 Vac distribution panel?

Yes, the unit accepts 230 Vac input and delivers up to 2500 W at 48 V 52 A, matching standard telecom rectifier shelves.

How can I verify the 53.5 V 46.7 A DC output is present after installation?

Measure the DC terminals with a multimeter; you should read approximately 53.5 V under load, confirming the supply is operating within its rated 46.7 A capability.

Ebenfalls in dieser Kategorie

Kunden haben diese ebenfalls verglichen

Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.