Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

KHACHIMO

KHACHIMO LE0MPSD16 1600W ATX power supply

SKU CH-2FMR-RP87V

A 1600 W ATX power supply tested and confirmed working, first listed in 2024

  • TypeATX
  • 1600W output supports high-end multi-GPU builds
  • ATX form factor fits standard PC cases
  • Tested working ensures reliable operation
  • Good quality components deliver stable power
  • First listed March 2024 indicates current design

High-output ATX power unit

The KHACHIMO LE0MPSD16 is a 1600W ATX power supply built for systems that demand sustained high current. It suits workstations, multi-GPU rigs and servers where continuous delivery matters. Buyers needing lower wattage or smaller form factors should look elsewhere.

Thermals, noise and power draw

Rated at 1600W, the unit converts mains power to regulated DC rails for CPU, GPU and storage. Normal use sees it operate within ATX specification limits for ripple and hold-up time. Test working status confirms basic function before shipment.

Build integration needs

Standard ATX dimensions let it mount in compatible chassis with a regular 24-pin motherboard connector and peripheral leads. The 1600W ceiling frees headroom for future expansion cards or drives. Builders must verify case clearance and cable routing space themselves.

Puncte forte

  • 1600W output supports high-end multi-GPU builds
  • ATX form factor fits standard PC cases
  • Tested working ensures reliable operation
  • Good quality components deliver stable power
  • First listed March 2024 indicates current design

Specificații

TypeATX

Întrebări despre acest articol

How do I install the LE0MPSD16 1600W ATX power supply and what step is often missed?

Mount the unit in the case with four screws, connect the 24-pin motherboard and 8-pin CPU cables, then plug in the IEC power cord and flip the rear switch to on.

What maintenance or replacement will the LE0MPSD16 1600W unit need later?

Clean dust from the intake grille and fan blades every few months using compressed air; the internal fan is the only moving part and may require replacement after years of continuous operation.

What limit appears first on the LE0MPSD16 1600W supply under sustained load?

The 1600 W maximum output rating is the first ceiling; drawing more than 1600 watts continuously will trigger over-power protection and shut the unit down.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.