Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

KHACHIMO

KHACHIMO LE0MPSD16 1600W ATX power supply

SKU CH-2FMR-RP87V

A 1600 W ATX power supply tested and confirmed working, first listed in 2024

  • TypeATX
  • 1600W output supports high-end multi-GPU builds
  • ATX form factor fits standard PC cases
  • Tested working ensures reliable operation
  • Good quality components deliver stable power
  • First listed March 2024 indicates current design

High-output ATX power unit

The KHACHIMO LE0MPSD16 is a 1600W ATX power supply built for systems that demand sustained high current. It suits workstations, multi-GPU rigs and servers where continuous delivery matters. Buyers needing lower wattage or smaller form factors should look elsewhere.

Thermals, noise and power draw

Rated at 1600W, the unit converts mains power to regulated DC rails for CPU, GPU and storage. Normal use sees it operate within ATX specification limits for ripple and hold-up time. Test working status confirms basic function before shipment.

Build integration needs

Standard ATX dimensions let it mount in compatible chassis with a regular 24-pin motherboard connector and peripheral leads. The 1600W ceiling frees headroom for future expansion cards or drives. Builders must verify case clearance and cable routing space themselves.

Poudarki

  • 1600W output supports high-end multi-GPU builds
  • ATX form factor fits standard PC cases
  • Tested working ensures reliable operation
  • Good quality components deliver stable power
  • First listed March 2024 indicates current design

Specifikacije

TypeATX

Vprašanja o tem izdelku

How do I install the LE0MPSD16 1600W ATX power supply and what step is often missed?

Mount the unit in the case with four screws, connect the 24-pin motherboard and 8-pin CPU cables, then plug in the IEC power cord and flip the rear switch to on.

What maintenance or replacement will the LE0MPSD16 1600W unit need later?

Clean dust from the intake grille and fan blades every few months using compressed air; the internal fan is the only moving part and may require replacement after years of continuous operation.

What limit appears first on the LE0MPSD16 1600W supply under sustained load?

The 1600 W maximum output rating is the first ceiling; drawing more than 1600 watts continuously will trigger over-power protection and shut the unit down.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.