Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White filament spool, 1.75 mm diameter, 0.25 kg weight

Lay Filaments

Lay Filaments Lay-Cloud Dissolvable Support Filament 1.75mm 0.25kg

SKU CH-Y1PF-SX688

Water-soluble support filament for flexible materials, removable in cold or hot water without damaging the printed part, 1.75 mm diameter, 0.25 kg spool

  • Water-soluble support dissolves completely in water leaving no residue
  • Works with flexible filaments like TPE for reliable dual-extrusion prints
  • Removes cleanly without damaging the final printed part
  • Tight ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 230-240 °C on standard 1.75 mm hardware

Purpose-built support for flexible filaments

This water-soluble filament is engineered specifically to support flexible and semi-flexible materials during dual-extrusion printing. It dissolves completely in water without harming the final printed piece. The material leaves no residue behind after removal.

Dissolves in cold or hot water

Supports wash away by simply submerging the finished print in water for a few hours. Hot water accelerates the process while cold water works equally well. No mechanical removal or chemicals are required to clean the part.

Prints at 230-240 degC with tight tolerance

The filament maintains a diameter tolerance of ± 0.1 mm for consistent extrusion during long prints. It runs at standard high temperatures suitable for flexible material pairings. The 0.25 kg spool provides enough length for multiple support structures.

Puncte forte

  • Water-soluble support dissolves completely in water leaving no residue
  • Works with flexible filaments like TPE for reliable dual-extrusion prints
  • Removes cleanly without damaging the final printed part
  • Tight ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 230-240 °C on standard 1.75 mm hardware

Specificații

BrandLay Filaments

Întrebări despre acest articol

How long does it take for the Lay-Cloud support material to dissolve in water?

Place the printed piece in cold or hot water for a few hours; the support material dissolves completely and leaves no trace, with hot water speeding up the process.

What printing temperature range does the 1.75 mm Lay-Cloud filament require?

The filament prints at 230-240 degC with a diameter tolerance of ± .1 mm, and no heated bed is required.

Will the 0.25 kg spool of 1.75 mm filament fit on my printer's holder?

The spool weighs .25 kg and uses standard 1.75 mm diameter; check your printer's spool mount dimensions to confirm physical fit.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.