Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
White filament spool, 1.75 mm diameter, 0.25 kg weight

Lay Filaments

Lay Filaments Lay-Cloud Dissolvable Support Filament 1.75mm 0.25kg

SKU CH-Y1PF-SX688

Water-soluble support filament for flexible materials, removable in cold or hot water without damaging the printed part, 1.75 mm diameter, 0.25 kg spool

  • Water-soluble support dissolves completely in water leaving no residue
  • Works with flexible filaments like TPE for reliable dual-extrusion prints
  • Removes cleanly without damaging the final printed part
  • Tight ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 230-240 °C on standard 1.75 mm hardware

Purpose-built support for flexible filaments

This water-soluble filament is engineered specifically to support flexible and semi-flexible materials during dual-extrusion printing. It dissolves completely in water without harming the final printed piece. The material leaves no residue behind after removal.

Dissolves in cold or hot water

Supports wash away by simply submerging the finished print in water for a few hours. Hot water accelerates the process while cold water works equally well. No mechanical removal or chemicals are required to clean the part.

Prints at 230-240 degC with tight tolerance

The filament maintains a diameter tolerance of ± 0.1 mm for consistent extrusion during long prints. It runs at standard high temperatures suitable for flexible material pairings. The 0.25 kg spool provides enough length for multiple support structures.

Pluspunten

  • Water-soluble support dissolves completely in water leaving no residue
  • Works with flexible filaments like TPE for reliable dual-extrusion prints
  • Removes cleanly without damaging the final printed part
  • Tight ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 230-240 °C on standard 1.75 mm hardware

Specificaties

BrandLay Filaments

Vragen over dit artikel

How long does it take for the Lay-Cloud support material to dissolve in water?

Place the printed piece in cold or hot water for a few hours; the support material dissolves completely and leaves no trace, with hot water speeding up the process.

What printing temperature range does the 1.75 mm Lay-Cloud filament require?

The filament prints at 230-240 degC with a diameter tolerance of ± .1 mm, and no heated bed is required.

Will the 0.25 kg spool of 1.75 mm filament fit on my printer's holder?

The spool weighs .25 kg and uses standard 1.75 mm diameter; check your printer's spool mount dimensions to confirm physical fit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.