Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black PCIe 5.0 M.2 to U.2 adapter cable with left-exit M.2 connector and 15-pin power, 1.6ft

LetLinkSo

LetLinkSo LLS-CB-1MT1UT-01 PCIe 5.0 M.2 to U.2 Adapter Left Exit 1.6ft

SKU CH-AT09-323Q3

Connects a U.2 NVMe SSD to an M.2 2280 M-key slot with PCIe 5.0 speeds up to 128 Gbps

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsLeft Exit
  • Connector AM.2 M key 2280
  • Connector BSFF-8639(U.2)
  • Connector StyleStraight

Cable Exit Direction Left Exit

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

M.2 to U.2 NVMe adapter

This PCIe 5.0 adapter connects a U.2 NVMe SSD to an M.2 2280 M key slot on a motherboard. The cable measures 1.6ft and uses a left exit orientation. It supports theoretical speeds up to 128 Gbps and is backward compatible with PCIe 4.0, 3.0, 2.0 and 1.0 devices. No drivers are required.

Build integration and power

The adapter plugs straight into an available M.2 2280 M key interface and frees the U.2 drive to sit elsewhere in the chassis. A SATA power cable must be connected to the 15-pin power connector on the adapter for the drive to function. The 50cm length suits typical desktop or server layouts.

Upgrade path and limits

This adapter replaces a direct M.2 NVMe installation when a U.2 drive is preferred for capacity or endurance. The jump is worth it when the motherboard has a spare M.2 2280 M key slot and the builder can supply SATA power. It does not serve builds that lack an M.2 M key interface or that need more than four PCIe lanes.

Puncte forte

  • Connect U.2 NVMe SSD to M.2 slot via PCIe 5.0 adapter
  • Achieve up to 128 Gbps theoretical data transfer rate
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 devices
  • Ready to use with no drivers or software required
  • Requires SATA power cable connection to function

Specificații

BrandLetLinkSo
SeriesM.2 to U.2 Adapter
ModelLLS-CB-1MT1UT-01
Part NumberLLS-CB-1MT1UT-01
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsLeft Exit
Connector AM.2 M key 2280
Connector BSFF-8639(U.2)
Connector StyleStraight
FeaturesENHANCED SYSTEM PERFORMANCE
Dimensions20'
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 5.0 M.2 to U.2 Adapter x 1

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 128 Gbps PCIe 5.0 link saturate before the U.2 NVMe SSD reaches its rated speed?

The adapter supports PCIe 5.0 x4 at up to 128 Gbps; sustained throughput will be limited by the specific U.2 NVMe SSD you install.

How much heat or noise does the adapter add when the U.2 drive runs continuously?

The passive cable assembly has no fan or active components, so it adds no audible noise and negligible heat beyond the drive itself.

Which power cable must already be present in the system for the adapter to work?

A standard 15-pin SATA power connector from the power supply is required to power the U.2 drive through the adapter.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.