Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Single black 120mm reverse-blade case fan with ARGB side strips, 28mm thick

Lian Li

Lian Li UNI Fan CL120 ARGB PWM 120mm Reverse Blade Black

SKU CH-K8T1-B0J9Y

A 28 mm thick 120 mm case fan with 2.38 mmH₂O static pressure, addressable RGB and reverse blades for pull configurations

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness28mm

Model LED Reverse Blade

Option Single Pack

  • 28 mm thickness delivers high static pressure for radiators and dense heatsinks
  • Reverse blade design directs airflow inward for cleaner intake paths
  • Fluid dynamic bearing reduces noise and extends operating life
  • Dual addressable RGB zones on blades and side strips enable independent lighting effects
  • 4 GHz wireless receiver with 4-pin PWM cable allows BIOS fan control without extra cables

Single 120 mm fan for wireless daisy-chain builds

This single black UNI FAN CL120 uses a 28 mm thick frame and reverse blade design to deliver 2.38 mmH2O static pressure for both air and water cooling. It targets builders who want a cable-free ARGB chain without buying a multi-pack.

Dual-zone ARGB controlled by L-Connect 3

Addressable LEDs on the blades and side strips form two independent lighting zones that are configured entirely in L-Connect 3 software. The 2.4 GHz wireless link removes the usual RGB and PWM cables between fans, leaving only a 4-pin receiver to the motherboard header.

Requires separate L-Wireless Sync Controller

The controller is not included with this single pack and must be purchased separately to enable the wireless signal and daisy-chain function. It connects to a rear I/O or internal 13-pin USB port, so cases without that header cannot use the wireless features.

Puncte forte

  • 28 mm thickness delivers high static pressure for radiators and dense heatsinks
  • Reverse blade design directs airflow inward for cleaner intake paths
  • Fluid dynamic bearing reduces noise and extends operating life
  • Dual addressable RGB zones on blades and side strips enable independent lighting effects
  • 4 GHz wireless receiver with 4-pin PWM cable allows BIOS fan control without extra cables

Specificații

BrandLian li
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness28mm
Bearing TypeFluid Dynamic
Air Pressure2.38 mmH2O
ColorBlack
LEDAddressable RGB

Alte versiuni ale acestui model

3 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 28 mm thick frame mean I will need a different mounting kit later?

The 28 mm frame uses standard 120 mm mounting holes, so no special kit is required unless your case specifies a thinner fan limit.

Will the 2.38 mmH₂O static pressure drop off first when the fan runs at full speed for hours?

At maximum PWM duty the fan delivers its rated 2.38 mmH₂O; sustained operation does not reduce that figure, though airflow will follow the speed curve set in BIOS.

How loud is the fluid-dynamic bearing when the fan spins continuously at 2.4 GHz wireless control?

The FDB design keeps noise low across the speed range; wireless control at 2.4 GHz adds no audible sound, so day-long operation stays quiet.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.