Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Single black 120mm reverse-blade case fan with ARGB side strips, 28mm thick

Lian Li

Lian Li UNI Fan CL120 ARGB PWM 120mm Reverse Blade Black

SKU CH-K8T1-B0J9Y

A 28 mm thick 120 mm case fan with 2.38 mmH₂O static pressure, addressable RGB and reverse blades for pull configurations

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness28mm

Model LED Reverse Blade

Option Single Pack

  • 28 mm thickness delivers high static pressure for radiators and dense heatsinks
  • Reverse blade design directs airflow inward for cleaner intake paths
  • Fluid dynamic bearing reduces noise and extends operating life
  • Dual addressable RGB zones on blades and side strips enable independent lighting effects
  • 4 GHz wireless receiver with 4-pin PWM cable allows BIOS fan control without extra cables

Single 120 mm fan for wireless daisy-chain builds

This single black UNI FAN CL120 uses a 28 mm thick frame and reverse blade design to deliver 2.38 mmH2O static pressure for both air and water cooling. It targets builders who want a cable-free ARGB chain without buying a multi-pack.

Dual-zone ARGB controlled by L-Connect 3

Addressable LEDs on the blades and side strips form two independent lighting zones that are configured entirely in L-Connect 3 software. The 2.4 GHz wireless link removes the usual RGB and PWM cables between fans, leaving only a 4-pin receiver to the motherboard header.

Requires separate L-Wireless Sync Controller

The controller is not included with this single pack and must be purchased separately to enable the wireless signal and daisy-chain function. It connects to a rear I/O or internal 13-pin USB port, so cases without that header cannot use the wireless features.

Punti di forza

  • 28 mm thickness delivers high static pressure for radiators and dense heatsinks
  • Reverse blade design directs airflow inward for cleaner intake paths
  • Fluid dynamic bearing reduces noise and extends operating life
  • Dual addressable RGB zones on blades and side strips enable independent lighting effects
  • 4 GHz wireless receiver with 4-pin PWM cable allows BIOS fan control without extra cables

Caratteristiche tecniche

BrandLian li
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness28mm
Bearing TypeFluid Dynamic
Air Pressure2.38 mmH2O
ColorBlack
LEDAddressable RGB

Altre versioni di questo modello

altri 3 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does the 28 mm thick frame mean I will need a different mounting kit later?

The 28 mm frame uses standard 120 mm mounting holes, so no special kit is required unless your case specifies a thinner fan limit.

Will the 2.38 mmH₂O static pressure drop off first when the fan runs at full speed for hours?

At maximum PWM duty the fan delivers its rated 2.38 mmH₂O; sustained operation does not reduce that figure, though airflow will follow the speed curve set in BIOS.

How loud is the fluid-dynamic bearing when the fan spins continuously at 2.4 GHz wireless control?

The FDB design keeps noise low across the speed range; wireless control at 2.4 GHz adds no audible sound, so day-long operation stays quiet.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.