Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small 1.3 inch square LCD board with joystick and four buttons, pin header along one edge

LORDWORLD

LORDWORLD 1.3inch LCD Display Module 240×240 ST7789

SKU CH-90H4-RFY81

A 1.3 inch IPS display module with 240×240 resolution, 65K colours, onboard joystick, four buttons and a female header for direct Pico attachment

  • Sharp 240×240 IPS visuals with 65K RGB colours
  • Direct-fit female header plugs straight onto a Pi Pico
  • On-board joystick plus four buttons for quick control
  • SPI-driven ST7789 keeps wiring simple
  • C/C++ and MicroPython examples speed up development

Compact 1.3 inch IPS display

This 1.3 inch LCD module packs a 240×240 pixel IPS panel with 65K RGB colours and an ST7789 driver that communicates over SPI. An onboard female pin header lets you plug it straight onto a Raspberry Pi Pico board, while a joystick and four user buttons give immediate interactive control. Development resources and manuals for C/C++ and MicroPython are included to accelerate prototyping.

Makers needing a ready-to-use Pico screen

Hobbyists and students building handheld interfaces, status dashboards or simple games will appreciate the integrated input controls and direct Pico mounting. Projects that require a larger viewing area, touch input or a different host connector should look at alternative display modules.

SPI‑driven 240×240 ST7789 panel

The single specification that decides fit is the SPI‑interfaced ST7789 controller driving a 240×240 pixel IPS panel; your host must provide an SPI bus and matching pinout for the onboard female header.

Puncte forte

  • Sharp 240×240 IPS visuals with 65K RGB colours
  • Direct-fit female header plugs straight onto a Pi Pico
  • On-board joystick plus four buttons for quick control
  • SPI-driven ST7789 keeps wiring simple
  • C/C++ and MicroPython examples speed up development

Specificații

BrandLORDWORLD

Întrebări despre acest articol

Which Raspberry Pi Pico board is required for the onboard female pin header to connect directly?

The module's female pin header matches the Raspberry Pi Pico series pinout for direct attachment.

Can the SPI bus on this display share the bus with other SPI peripherals on the same Pico?

Yes, the ST7789 driver uses the SPI bus, allowing other SPI devices to share the bus with separate chip-select lines.

How can I verify the 240×240 IPS panel and 65K RGB colours are working after wiring?

Run the included MicroPython or C/C++ examples; the screen should show full-colour graphics and respond to the joystick and four buttons.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.