LORDWORLD
LORDWORLD 1.3inch LCD Display Module 240×240 ST7789
A 1.3 inch IPS display module with 240×240 resolution, 65K colours, onboard joystick, four buttons and a female header for direct Pico attachment
- Sharp 240×240 IPS visuals with 65K RGB colours
- Direct-fit female header plugs straight onto a Pi Pico
- On-board joystick plus four buttons for quick control
- SPI-driven ST7789 keeps wiring simple
- C/C++ and MicroPython examples speed up development
Compact 1.3 inch IPS display
This 1.3 inch LCD module packs a 240×240 pixel IPS panel with 65K RGB colours and an ST7789 driver that communicates over SPI. An onboard female pin header lets you plug it straight onto a Raspberry Pi Pico board, while a joystick and four user buttons give immediate interactive control. Development resources and manuals for C/C++ and MicroPython are included to accelerate prototyping.
Makers needing a ready-to-use Pico screen
Hobbyists and students building handheld interfaces, status dashboards or simple games will appreciate the integrated input controls and direct Pico mounting. Projects that require a larger viewing area, touch input or a different host connector should look at alternative display modules.
SPI‑driven 240×240 ST7789 panel
The single specification that decides fit is the SPI‑interfaced ST7789 controller driving a 240×240 pixel IPS panel; your host must provide an SPI bus and matching pinout for the onboard female header.
特長
- Sharp 240×240 IPS visuals with 65K RGB colours
- Direct-fit female header plugs straight onto a Pi Pico
- On-board joystick plus four buttons for quick control
- SPI-driven ST7789 keeps wiring simple
- C/C++ and MicroPython examples speed up development
仕様
| Brand | LORDWORLD |
|---|
この商品に関する質問
Which Raspberry Pi Pico board is required for the onboard female pin header to connect directly?
The module's female pin header matches the Raspberry Pi Pico series pinout for direct attachment.
Can the SPI bus on this display share the bus with other SPI peripherals on the same Pico?
Yes, the ST7789 driver uses the SPI bus, allowing other SPI devices to share the bus with separate chip-select lines.
How can I verify the 240×240 IPS panel and 65K RGB colours are working after wiring?
Run the included MicroPython or C/C++ examples; the screen should show full-colour graphics and respond to the joystick and four buttons.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。



