Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Full-metal adapter bracket converting a 2.5 inch drive to 3.5 inch form factor with 22-pin SAS SATA connector

LORDWORLD

LORDWORLD 2.5" to 3.5" SAS SATA 22pin Hard Drive Adapter

SKU CH-FHE0-QPYNK

Converts a 2.5 inch SATA or SAS drive to fit a 3.5 inch bay, supports 7, 9.5, 12.5 and 15 mm heights and 12 Gbps speeds

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

2.5" to 3.5" SAS SATA Adapter

This full-metal adapter converts a 2.5 inch SATA HDD or SSD into a 3.5 inch form factor for use in standard drive bays. It is built for system builders and IT professionals who need to install smaller drives into 3.5 inch hot-swap backplanes, rackmounts or internal bays.

Capacity and headroom

The bracket accepts drives measuring 7, 9.5, 12.5 and 15 mm in height, covering the common range of laptop and enterprise 2.5 inch units. It passes through a single-channel SAS 3.0 12Gbps or SATA 6Gbps connection, so the drive runs at its native interface speed without added latency.

What the mounting kit changes

The heavy-duty metal frame secures the drive firmly while leaving the 22-pin connector accessible for quick swaps. It turns a loose 2.5 inch drive into a rugged module that fits directly into existing 3.5 inch carrier trays, eliminating the need for improvised brackets or cable extensions.

Puncte forte

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

Specificații

BrandLORDWORLD

Întrebări despre acest articol

Will my 2.5 SATA SSD fit this 3.5 bay adapter if it is 15mm thick?

Yes, the adapter accepts 2.5 SATA drives from 7mm up to 15mm height so a 15mm drive will mount correctly.

How can I confirm the adapter is passing data at SAS 3.0 12Gbps after installation?

Check the host controller or BIOS link-speed report; it should show a 12Gbps negotiated rate on the single SAS channel.

Does the package include the 22pin SAS SATA cable or only the metal mounting bracket?

The kit supplies the full-metal mounting bracket and the 22pin SAS SATA connector assembly; no separate cable purchase is required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.