저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Full-metal adapter bracket converting a 2.5 inch drive to 3.5 inch form factor with 22-pin SAS SATA connector

LORDWORLD

LORDWORLD 2.5" to 3.5" SAS SATA 22pin Hard Drive Adapter

SKU CH-FHE0-QPYNK

Converts a 2.5 inch SATA or SAS drive to fit a 3.5 inch bay, supports 7, 9.5, 12.5 and 15 mm heights and 12 Gbps speeds

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

2.5" to 3.5" SAS SATA Adapter

This full-metal adapter converts a 2.5 inch SATA HDD or SSD into a 3.5 inch form factor for use in standard drive bays. It is built for system builders and IT professionals who need to install smaller drives into 3.5 inch hot-swap backplanes, rackmounts or internal bays.

Capacity and headroom

The bracket accepts drives measuring 7, 9.5, 12.5 and 15 mm in height, covering the common range of laptop and enterprise 2.5 inch units. It passes through a single-channel SAS 3.0 12Gbps or SATA 6Gbps connection, so the drive runs at its native interface speed without added latency.

What the mounting kit changes

The heavy-duty metal frame secures the drive firmly while leaving the 22-pin connector accessible for quick swaps. It turns a loose 2.5 inch drive into a rugged module that fits directly into existing 3.5 inch carrier trays, eliminating the need for improvised brackets or cable extensions.

주요 특징

  • Fits 2.5" SATA drives into any 3.5" SATA bay
  • Accepts 7, 9.5, 12.5 and 15mm drive heights
  • Runs at SATA 6Gbps or SAS 12Gbps single channel
  • Full metal construction protects drives during hot swaps
  • Tool-free design allows quick drive changes in rackmounts

사양

BrandLORDWORLD

이 상품에 대한 질문

Will my 2.5 SATA SSD fit this 3.5 bay adapter if it is 15mm thick?

Yes, the adapter accepts 2.5 SATA drives from 7mm up to 15mm height so a 15mm drive will mount correctly.

How can I confirm the adapter is passing data at SAS 3.0 12Gbps after installation?

Check the host controller or BIOS link-speed report; it should show a 12Gbps negotiated rate on the single SAS channel.

Does the package include the 22pin SAS SATA cable or only the metal mounting bracket?

The kit supplies the full-metal mounting bracket and the 22pin SAS SATA connector assembly; no separate cable purchase is required.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.