Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small green PCB with silver metal shield and two rows of gold pin headers

LORDWORLD

LORDWORLD ESP32-C5 Development Board 240MHz pre-soldered Header

SKU CH-BXVS-KWVH1

RISC-V IoT board with dual-band Wi-Fi 6, Bluetooth 5, Thread and Zigbee 3.0, 240 MHz clock, pre-soldered headers

  • RISC-V core runs at 240 MHz for responsive IoT control
  • Dual-band Wi-Fi 6 covers 2.4 GHz and 5 GHz networks
  • Bluetooth 5 low-energy links peripherals with minimal power draw
  • IEEE 802.15.4 radio adds Zigbee 3.0 and Thread mesh support
  • Pre-soldered headers let you start coding in ESP-IDF or Arduino IDE immediately

ESP32-C5 RISC-V IoT board

This LORDWORLD development board carries the ESP32-C5-WROOM-1 module, a 32-bit RISC-V MCU clocked at 240 MHz. It delivers dual-band Wi-Fi 6 on 2.4 and 5 GHz, Bluetooth 5 Low Energy and IEEE 802.15.4 radio for Thread and Zigbee 3.0 mesh networks. Headers are pre-soldered so the board is ready for breadboard or perfboard work immediately.

Makers building multi-protocol gateways

The board suits engineers who need Wi-Fi 6, Bluetooth LE and 802.15.4 Thread or Zigbee in one compact module with full ESP-IDF and Arduino IDE toolchain support. It is not for projects that require only single-band 2.4 GHz connectivity or classic Bluetooth audio profiles, nor for designs that must run on non-RISC-V architectures.

240 MHz RISC-V clock speed

The 240 MHz maximum CPU frequency is the single figure that determines whether the board meets real-time processing deadlines for sensor fusion, local automation logic or encrypted mesh routing. Developers with lighter workloads may choose a lower-clocked variant, while heavier edge-AI tasks would need a faster processor.

Puncte forte

  • RISC-V core runs at 240 MHz for responsive IoT control
  • Dual-band Wi-Fi 6 covers 2.4 GHz and 5 GHz networks
  • Bluetooth 5 low-energy links peripherals with minimal power draw
  • IEEE 802.15.4 radio adds Zigbee 3.0 and Thread mesh support
  • Pre-soldered headers let you start coding in ESP-IDF or Arduino IDE immediately

Specificații

BrandLORDWORLD

Întrebări despre acest articol

What physical space does the ESP32-C5-WROOM-1 module need on a breadboard?

The board plugs straight into a standard breadboard because the header pins are already soldered, so no extra socket or adapter is required.

Which step do people skip when starting with the Arduino IDE on this board?

They forget to add the ESP32 board-manager URL and install the ESP32 core before selecting the ESP32C5 Dev Module, so the upload fails.

When will the onboard ESP32-C5-WROOM-1 module need replacement?

The module is rated for typical industrial temperature cycles and should last the life of the project; only physical damage or a failed flash would require swapping the board.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.