Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small green PCB with silver metal shield and two rows of gold pin headers

LORDWORLD

LORDWORLD ESP32-C5 Development Board 240MHz pre-soldered Header

SKU CH-BXVS-KWVH1

RISC-V IoT board with dual-band Wi-Fi 6, Bluetooth 5, Thread and Zigbee 3.0, 240 MHz clock, pre-soldered headers

  • RISC-V core runs at 240 MHz for responsive IoT control
  • Dual-band Wi-Fi 6 covers 2.4 GHz and 5 GHz networks
  • Bluetooth 5 low-energy links peripherals with minimal power draw
  • IEEE 802.15.4 radio adds Zigbee 3.0 and Thread mesh support
  • Pre-soldered headers let you start coding in ESP-IDF or Arduino IDE immediately

ESP32-C5 RISC-V IoT board

This LORDWORLD development board carries the ESP32-C5-WROOM-1 module, a 32-bit RISC-V MCU clocked at 240 MHz. It delivers dual-band Wi-Fi 6 on 2.4 and 5 GHz, Bluetooth 5 Low Energy and IEEE 802.15.4 radio for Thread and Zigbee 3.0 mesh networks. Headers are pre-soldered so the board is ready for breadboard or perfboard work immediately.

Makers building multi-protocol gateways

The board suits engineers who need Wi-Fi 6, Bluetooth LE and 802.15.4 Thread or Zigbee in one compact module with full ESP-IDF and Arduino IDE toolchain support. It is not for projects that require only single-band 2.4 GHz connectivity or classic Bluetooth audio profiles, nor for designs that must run on non-RISC-V architectures.

240 MHz RISC-V clock speed

The 240 MHz maximum CPU frequency is the single figure that determines whether the board meets real-time processing deadlines for sensor fusion, local automation logic or encrypted mesh routing. Developers with lighter workloads may choose a lower-clocked variant, while heavier edge-AI tasks would need a faster processor.

Poudarki

  • RISC-V core runs at 240 MHz for responsive IoT control
  • Dual-band Wi-Fi 6 covers 2.4 GHz and 5 GHz networks
  • Bluetooth 5 low-energy links peripherals with minimal power draw
  • IEEE 802.15.4 radio adds Zigbee 3.0 and Thread mesh support
  • Pre-soldered headers let you start coding in ESP-IDF or Arduino IDE immediately

Specifikacije

BrandLORDWORLD

Vprašanja o tem izdelku

What physical space does the ESP32-C5-WROOM-1 module need on a breadboard?

The board plugs straight into a standard breadboard because the header pins are already soldered, so no extra socket or adapter is required.

Which step do people skip when starting with the Arduino IDE on this board?

They forget to add the ESP32 board-manager URL and install the ESP32 core before selecting the ESP32C5 Dev Module, so the upload fails.

When will the onboard ESP32-C5-WROOM-1 module need replacement?

The module is rated for typical industrial temperature cycles and should last the life of the project; only physical damage or a failed flash would require swapping the board.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.