Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small green circuit board with 40-pin header metal heatsink and cooling fan

LORDWORLD

LORDWORLD PoE HAT (F) development board for Raspberry Pi 5

SKU CH-QS0N-3SM6V

A PoE HAT delivering power and data over a single Ethernet cable to a Raspberry Pi 5 with a 40-pin header, isolated SMPS, and active fan cooling

  • Powers Raspberry Pi 5 through a single Ethernet cable using IEEE 802.3af/at standard
  • Fully isolated switched-mode supply protects the board from electrical noise
  • Onboard high-speed fan with metal heatsink keeps temperatures low under load
  • Standard 40-pin GPIO header ensures direct compatibility with Raspberry Pi 5
  • Compact HAT form factor adds PoE and cooling without extra bulk

PoE HAT (F) for Raspberry Pi 5

The LORDWORLD PoE HAT (F) is a development board that adds Power over Ethernet to a Raspberry Pi 5 through the standard 40-pin GPIO header. It draws power from any IEEE 802.3 af/at compliant source and delivers both electricity and network connectivity over one Ethernet cable. A fully isolated switched-mode supply protects the host board.

Makers and embedded engineers

This board suits makers and engineers who want to deploy a Raspberry Pi 5 in locations without a nearby mains outlet, such as remote sensors, kiosks or headless servers. It is not for builders who need to power the Pi from a USB-C adapter or battery pack, nor for projects that require a different HAT form factor or additional GPIO breakout pins.

IEEE 802.3 af/at compliance

The single specification that decides fit is IEEE 802.3 af/at compliance on the power sourcing equipment. If your switch or injector does not meet that standard, the HAT cannot supply the Raspberry Pi 5 and a separate power supply will be required.

Puncte forte

  • Powers Raspberry Pi 5 through a single Ethernet cable using IEEE 802.3af/at standard
  • Fully isolated switched-mode supply protects the board from electrical noise
  • Onboard high-speed fan with metal heatsink keeps temperatures low under load
  • Standard 40-pin GPIO header ensures direct compatibility with Raspberry Pi 5
  • Compact HAT form factor adds PoE and cooling without extra bulk

Specificații

BrandLORDWORLD

Întrebări despre acest articol

Will the onboard cooling fan need replacement after extended use?

The onboard high-speed active cooling fan is a moving part and may require replacement if bearing noise increases or airflow drops after long-term operation.

What power limit appears first when the HAT runs continuously at full load?

The IEEE 802.3af/at power sourcing equipment limits the maximum input power, so the PoE standard's power ceiling is reached before the HAT's own circuitry saturates.

How much heat and noise does the fan and heatsink produce during all-day operation?

The metal heatsink and high-speed fan actively dissipate heat from the fully isolated SMPS, keeping the Raspberry Pi 5 cooler while generating audible fan noise under sustained load.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.