نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Small green circuit board with 40-pin header metal heatsink and cooling fan

LORDWORLD

LORDWORLD PoE HAT (F) development board for Raspberry Pi 5

SKU CH-QS0N-3SM6V

A PoE HAT delivering power and data over a single Ethernet cable to a Raspberry Pi 5 with a 40-pin header, isolated SMPS, and active fan cooling

  • Powers Raspberry Pi 5 through a single Ethernet cable using IEEE 802.3af/at standard
  • Fully isolated switched-mode supply protects the board from electrical noise
  • Onboard high-speed fan with metal heatsink keeps temperatures low under load
  • Standard 40-pin GPIO header ensures direct compatibility with Raspberry Pi 5
  • Compact HAT form factor adds PoE and cooling without extra bulk

PoE HAT (F) for Raspberry Pi 5

The LORDWORLD PoE HAT (F) is a development board that adds Power over Ethernet to a Raspberry Pi 5 through the standard 40-pin GPIO header. It draws power from any IEEE 802.3 af/at compliant source and delivers both electricity and network connectivity over one Ethernet cable. A fully isolated switched-mode supply protects the host board.

Makers and embedded engineers

This board suits makers and engineers who want to deploy a Raspberry Pi 5 in locations without a nearby mains outlet, such as remote sensors, kiosks or headless servers. It is not for builders who need to power the Pi from a USB-C adapter or battery pack, nor for projects that require a different HAT form factor or additional GPIO breakout pins.

IEEE 802.3 af/at compliance

The single specification that decides fit is IEEE 802.3 af/at compliance on the power sourcing equipment. If your switch or injector does not meet that standard, the HAT cannot supply the Raspberry Pi 5 and a separate power supply will be required.

أبرز المميزات

  • Powers Raspberry Pi 5 through a single Ethernet cable using IEEE 802.3af/at standard
  • Fully isolated switched-mode supply protects the board from electrical noise
  • Onboard high-speed fan with metal heatsink keeps temperatures low under load
  • Standard 40-pin GPIO header ensures direct compatibility with Raspberry Pi 5
  • Compact HAT form factor adds PoE and cooling without extra bulk

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

Will the onboard cooling fan need replacement after extended use?

The onboard high-speed active cooling fan is a moving part and may require replacement if bearing noise increases or airflow drops after long-term operation.

What power limit appears first when the HAT runs continuously at full load?

The IEEE 802.3af/at power sourcing equipment limits the maximum input power, so the PoE standard's power ceiling is reached before the HAT's own circuitry saturates.

How much heat and noise does the fan and heatsink produce during all-day operation?

The metal heatsink and high-speed fan actively dissipate heat from the fully isolated SMPS, keeping the Raspberry Pi 5 cooler while generating audible fan noise under sustained load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.