MAIWO
MAIWO K8AA 8-Bay SATA RAID Enclosure USB-C/eSATA 128TB
Eight-bay SATA enclosure with RAID 0/5/JBOD modes, 128 TB total capacity, USB-C and eSATA links, and temperature-controlled fan cooling
- Typehard disk enclosure / hard drive enclosure
- MaterialAluminum / Plastic
- Internal InterfaceSATA
- External InterfaceType C
- HDD Count SupportedWith RAID
- Number of Bay8 Bay
- Supports up to 128TB total storage with eight 16TB drives
- Eight hardware RAID modes including RAID 0, 5, 5+0 and JBOD options
- USB-C and eSATA interfaces deliver up to 5Gbps transfer speeds
- Smart fan runs only above 45°C with two automatic speed levels
- Touch-panel LEDs show power status and enclosure activity at a glance
Eight-bay SATA RAID enclosure for multi-drive
The MAIWO K8AA is an 8-bay direct-attached storage device that accepts 2.5-inch and 3.5-inch SATA hard drives and SSDs. It presents up to 128TB of total capacity across eight drives to Windows, macOS and Linux hosts. The unit targets creators, small offices and home-lab builders who need redundant or high-capacity local storage without a full NAS operating system.
Tool-free drive trays and automatic fan control
Drives slide into the front-loading trays without screws; a supplied screwdriver secures the tray latch if desired. An internal temperature sensor keeps the fan off below 45°C, runs it at low speed between 46°C and 47°C, and steps to high speed at 48°C or above. The most common issue is forgetting to initialise the RAID mode on the front touchpad before the operating system sees the volume, which leaves the array in JBOD.
Verify host port and drive height before ordering
The enclosure connects via USB-C at up to 5Gbps or through the eSATA port; a USB-C to USB-A cable is included for older ports. UASP support requires a compatible host controller to reach the quoted 70 percent speed improvement. Only SATA drives are supported; IDE drives will not fit. Check that 3.5-inch drives are no thicker than 26mm and that 2.5-inch drives match one of the listed height allowances.
Puncte forte
- Supports up to 128TB total storage with eight 16TB drives
- Eight hardware RAID modes including RAID 0, 5, 5+0 and JBOD options
- USB-C and eSATA interfaces deliver up to 5Gbps transfer speeds
- Smart fan runs only above 45°C with two automatic speed levels
- Touch-panel LEDs show power status and enclosure activity at a glance
Specificații
| Type | hard disk enclosure / hard drive enclosure |
|---|---|
| Material | Aluminum / Plastic |
| Internal Interface | SATA |
| External Interface | Type C |
| HDD Count Supported | With RAID |
| Number of Bay | 8 Bay |
| Maximum Capacity (per Bay) | Up to 16TB |
| Fan | Yes |
| Specifications | Product name: 8 Bay Hard Drive RAID Enclosure for 2.5/3.5 inch SATA SSD/HDD Product function: Data transfer read&write&backup Model number: K8AA Package size 45.9*45.9*26.4CM/18*18*10.3inch Product size 13.7*13.6*5.9inch Material Aluminum Color Black Weight 8.13kg Supported hard disk 2.5/3.5 SATA HDD/SSD & mSATA Hardware Interface FireWire eSATA, USB 3.0 Type C Power Source 350W Transfer rate Max 5Gbps Max capacity 16TB*8=128TB Features built-in smart temperature management system, Lcd finger-touch screen display the working temperature and working time duration |
| Operating Systems Supported | Compatible with most of the leading operating systems like MAC, Windows, Linux, and so much more |
| Features | The K8AA RAID Enclosure is the redundant array of independent drives, which adds a series of hard disk drives separate from the central system. This is great for people who usually use multiple hard disks in the system. |
| Dimensions | 13.7*13.6*5.9inch |
| Weight | 17lbs |
| Package Contents | 1x 8 Bay RAID Enclosure 1x USB-C to USB-C Data Cable (80cm/10Gbps) 1x USB-C to USB-A Data Cable (80cm/31.5inch) 1x Power Cable (1.2m/47.24inch) 1x Screw Driver |
Întrebări despre acest articol
How do I verify the RAID array is healthy after setting up the K8AA?
The front touchpad LED indicators display power status and enclosure activity, letting you confirm the RAID mode is active and drives are accessible.
What cables and tools come with the K8AA and what must I supply?
The box includes the 8-bay enclosure, a 10Gbps USB-C to USB-C cable (80cm), a USB-C to USB-A cable (80cm), a 1.2m power cable and a screwdriver; you must provide up to eight 2.5 or 3.5 inch SATA drives.
Which RAID mode should I choose for maximum capacity versus data redundancy on the K8AA?
For maximum capacity use NORMAL or BIG LARGE spanning modes; for redundancy choose RAID 5 or RAID 5+0, noting each bay supports up to 16TB for a total of 128TB.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
