Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black ATX power adapter cable with one 24-pin 20+4 main connector and two 24-pin secondary connectors, 85 cm length

myVolts

myVolts Dual PSU Adapter Starter Portable Practical 24Pin 20+4 85cm 2000W

SKU CH-2ACA-VQXQJ

Dual PSU adapter links two power supplies to one motherboard via 24-pin and 20+4-pin connectors, adding up to 2000 W for high-demand graphics cards

  • TypeAT
  • Connects two PSUs for extra graphics power without hardware upgrade
  • Supports up to three PSUs on one motherboard
  • 20+4 pin main connector works with 24- or 20-pin sockets
  • 85 cm cable keeps build tidy and portable
  • Rated for power supplies up to 2000 W

Dual PSU Adapter for Multi-Unit Power

This myVolts adapter links up to three power supplies to a single motherboard using one main 24-pin female connector and two secondary 24-pin female connectors. It solves video card power shortages that cause frequency reduction without requiring a PSU upgrade. The cable measures approximately 85 cm and supports combined loads within 2000 W.

Suits builders adding GPU power on existing units

It suits enthusiasts running high-draw graphics cards who want to keep their current power supplies rather than buy a larger single unit. It is not for systems that already have adequate wattage from one PSU or builds where only a single power source is available or desired.

20+4 pin main connector fits 20- or 24-pin boards

The main cable uses a 20+4 pin design that works with both 20-pin and 24-pin motherboard sockets. This single specification determines whether the adapter matches your board, so verify the motherboard connector before purchase.

Puncte forte

  • Connects two PSUs for extra graphics power without hardware upgrade
  • Supports up to three PSUs on one motherboard
  • 20+4 pin main connector works with 24- or 20-pin sockets
  • 85 cm cable keeps build tidy and portable
  • Rated for power supplies up to 2000 W

Specificații

TypeAT

Întrebări despre acest articol

What does the 2000 W rating mean when the adapter is installed in a system?

It indicates the maximum combined power the adapter can pass from up to three PSUs to the motherboard; actual delivery depends on each unit’s own rating.

How does the 24-pin 20+4 interface affect compatibility with different motherboards?

The 20+4 pin main connector fits both 24-pin and 20-pin ATX motherboards, while the two secondary 24-pin connectors accept standard PSU cables.

What clearance is needed for the 85 cm cables when routing them inside a case?

The 85 cm length gives ample slack for full-tower or dual-chassis layouts; allow space for the ABS connectors and cable bend radius near the motherboard socket.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.