Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black ATX power adapter cable with one 24-pin 20+4 main connector and two 24-pin secondary connectors, 85 cm length

myVolts

myVolts Dual PSU Adapter Starter Portable Practical 24Pin 20+4 85cm 2000W

SKU CH-2ACA-VQXQJ

Dual PSU adapter links two power supplies to one motherboard via 24-pin and 20+4-pin connectors, adding up to 2000 W for high-demand graphics cards

  • TypeAT
  • Connects two PSUs for extra graphics power without hardware upgrade
  • Supports up to three PSUs on one motherboard
  • 20+4 pin main connector works with 24- or 20-pin sockets
  • 85 cm cable keeps build tidy and portable
  • Rated for power supplies up to 2000 W

Dual PSU Adapter for Multi-Unit Power

This myVolts adapter links up to three power supplies to a single motherboard using one main 24-pin female connector and two secondary 24-pin female connectors. It solves video card power shortages that cause frequency reduction without requiring a PSU upgrade. The cable measures approximately 85 cm and supports combined loads within 2000 W.

Suits builders adding GPU power on existing units

It suits enthusiasts running high-draw graphics cards who want to keep their current power supplies rather than buy a larger single unit. It is not for systems that already have adequate wattage from one PSU or builds where only a single power source is available or desired.

20+4 pin main connector fits 20- or 24-pin boards

The main cable uses a 20+4 pin design that works with both 20-pin and 24-pin motherboard sockets. This single specification determines whether the adapter matches your board, so verify the motherboard connector before purchase.

I korthet

  • Connects two PSUs for extra graphics power without hardware upgrade
  • Supports up to three PSUs on one motherboard
  • 20+4 pin main connector works with 24- or 20-pin sockets
  • 85 cm cable keeps build tidy and portable
  • Rated for power supplies up to 2000 W

Specifikationer

TypeAT

Frågor om den här produkten

What does the 2000 W rating mean when the adapter is installed in a system?

It indicates the maximum combined power the adapter can pass from up to three PSUs to the motherboard; actual delivery depends on each unit’s own rating.

How does the 24-pin 20+4 interface affect compatibility with different motherboards?

The 20+4 pin main connector fits both 24-pin and 20-pin ATX motherboards, while the two secondary 24-pin connectors accept standard PSU cables.

What clearance is needed for the 85 cm cables when routing them inside a case?

The 85 cm length gives ample slack for full-tower or dual-chassis layouts; allow space for the ABS connectors and cable bend radius near the motherboard socket.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.