Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

myVolts

myVolts RSP-500-15 500W 15V Power Supply

SKU CH-RF5B-KEEHA

Enclosed 500 W AC/DC supply delivering 15 V at 33.4 A with active PFC, forced-air cooling and remote monitoring for industrial automation

  • TypeAT
  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

Industrial 500W 15V Power Supply

The myVolts RSP-500-15 is a 500W single-output enclosed AC/DC power supply delivering 15V at 33.4A. It suits factory automation control apparatus, test and measurement instruments, laser-related machines and burn-in facilities. The unit accepts a universal 85-264Vac input with built-in active PFC function for industrial environments.

Forced-Air Cooling 90.5% Efficiency

Forced air cooling by a built-in DC fan manages thermals during normal operation. High efficiency up to 90.5% reduces waste heat and power draw across the input range. Protections include short circuit, overload, over voltage and over temperature to maintain stable output.

Sustained Load Remote Monitoring

Remote ON-OFF control, remote sense and DC OK signal allow integration into automated factories and power distribution cabinets for continuous duty. The supply operates at ambient temperatures up to 70°C with fan speed control adapting to sustained loads. Three-year warranty covers industrial use cycles.

Puncte forte

  • 500 W single-output enclosed AC/DC power supply
  • Universal 85–264 VAC input with active PFC
  • High efficiency up to 90.5 % reduces heat
  • Forced air cooling by built-in DC fan
  • Remote ON-OFF, remote sense and DC OK signal built in

Specificații

TypeAT

Întrebări despre acest articol

How do I mount and wire the RSP-500-15, and which step causes the most trouble?

Screw the enclosed chassis to a flat metal surface using the four corner holes, then connect live, neutral and earth to the three‑pin input block; the step most installers miss is tightening the DC output terminals to the specified torque so the 33.4 A load cannot loosen them.

What part will need replacement first during continuous operation?

The built‑in DC cooling fan is the only moving component; after several years of 24/7 use at up to 70 °C ambient its bearings wear out and the fan must be swapped to keep forced‑air cooling effective.

At what point does the unit hit its limit under sustained full load?

The 500 W / 15 V output is capped at 33.4 A; if the draw exceeds that, overload protection activates and shuts the supply down until the load drops back within the rated current.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.