Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular silver metal power supply unit with terminal blocks and voltage selector switch

myVolts

myVolts S-50-24 24V 50.4W 2.1A outdoor power supply

SKU CH-MP34-WDDBP MPN S-50-24

Delivers 24V DC at 2.1A with 50.4W output and 86% efficiency from 85-264VAC input

  • TypeAT
  • Delivers stable 24 V DC for industrial equipment
  • 4 W output handles demanding loads with 86 % efficiency
  • Selectable 85-132 V or 170-264 V AC input suits global sites
  • Ripple and noise limited to 200 mVp-p for clean power
  • Simple wiring and copper coil transformer make installation safe and quick

Industrial 24V 50.4W Switching Supply

This 24 V, 2.1 A switching power supply delivers 50.4 W for industrial control panels, PLC systems and transportation equipment. It accepts a selectable AC input of 85-132 VAC or 170-264 VAC at 47-63 Hz, plus 240-370 VDC. A copper coil transformer and magnetic-ring filter capacitor provide stable output with 86 % efficiency. Simple wiring makes installation straightforward for technicians and system integrators.

Continuous 2.1 A with ±1 % regulation

The unit maintains rated current from 0 to 2.1 A while holding output voltage within ±1 % and ripple below 200 mVp-p. Line and load regulation each stay within ±0.5 %, so sensitive logic circuits receive clean power. Inrush current reaches 45 A at 230 VAC on cold start, and leakage remains under 2 mA at 240 VAC. Voltage can be trimmed ±10 % to compensate for cable drops in long runs.

Adjustable output and rugged construction

A built-in switch selects the AC input range, while a trim potentiometer allows ±10 % voltage adjustment without extra tools. The copper coil design improves thermal reliability in demanding environments. No mounting brackets, DIN-rail clips or configuration software are included, so installers must provide their own mechanical fixing and monitoring. The supply suits fixed indoor or sheltered outdoor cabinets where a compact, lightweight DC source is required.

Puncte forte

  • Delivers stable 24 V DC for industrial equipment
  • 4 W output handles demanding loads with 86 % efficiency
  • Selectable 85-132 V or 170-264 V AC input suits global sites
  • Ripple and noise limited to 200 mVp-p for clean power
  • Simple wiring and copper coil transformer make installation safe and quick

Specificații

TypeAT

Întrebări despre acest articol

Will the S-50-24 run on my existing 115 VAC mains without rewiring?

Yes, the built-in selector switch lets you choose the 85-132 VAC range for 115 V operation.

How can I verify the unit is delivering a clean 24 V once installed?

Measure the DC output with a multimeter; it should read 24 V ±1 % with ripple below 200 mVp-p.

Does the box include mounting brackets or an AC power cord?

Only the power supply itself is supplied; brackets and an AC cord must be sourced separately.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.