Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 ECC RDIMM 2Rx4 CL46 Supermicro H13DSH memory upgrade

SKU CH-CEP6-CQQ4J

A 128 GB DDR5 5600 registered ECC module with 2Rx4 rank, 1.1 V operation and CL46 latency, validated for the Supermicro H13DSH motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

Vedeți celelalte 30 configurații
  • 128 GB capacity runs at full rated speed
  • DDR5 5600 (PC5-44800) matches the controller spec exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.1 V voltage match the motherboard requirements
  • Verified fitment for Supermicro H13DSH motherboard

128GB DDR5 5600 ECC RDIMM

This 128GB DDR5 5600 registered ECC module targets administrators upgrading a Supermicro H13DSH platform. The 2Rx4 organization and CL46 timing match the board's native memory controller expectations so the full capacity is recognized at rated speed.

288-pin registered form factor

The 288-pin RDIMM form factor is the only type the H13DSH accepts, not UDIMM or SODIMM. Registered architecture buffers address and command signals, allowing every slot to be populated at full capacity without overloading the controller. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Sustained enterprise workloads

Operating at 1.1V, the module maintains stability during continuous server workloads rather than short bursts. Registered buffering and on-die ECC keep signal integrity consistent across fully populated channels, reducing unplanned reboots in production environments.

Puncte forte

  • 128 GB capacity runs at full rated speed
  • DDR5 5600 (PC5-44800) matches the controller spec exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.1 V voltage match the motherboard requirements
  • Verified fitment for Supermicro H13DSH motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How many DIMM slots does the Supermicro H13DSH board provide for this 128 GB DDR5-5600 kit?

The Supermicro H13DSH motherboard is a dual-socket SP5 platform with 12 DDR5 RDIMM slots per socket, giving 24 slots total. This 128 GB module occupies one slot; full population would require 24 identical modules.

Does the registered ECC design keep power draw low enough for continuous 24/7 server operation?

Each module runs at the standard DDR5 1.10 V and uses a registered buffer that off-loads the memory controller. That combination is what enterprise platforms expect for sustained full-capacity operation without thermal throttling.

What motherboard revision or BIOS version must already be installed for this DDR5-5600 RDIMM to be recognised at full speed?

Supermicro specifies the H13DSH for DDR5-5600 registered ECC DIMMs. The board’s memory controller and SPD hub will train the module at 5600 MT/s CL46 2Rx4 1.10 V provided the BIOS supports the SP5 memory reference code for that speed grade.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.