Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 ECC RDIMM 2Rx4 CL46 Supermicro H13DSH memory upgrade

SKU CH-CEP6-CQQ4J

A 128 GB DDR5 5600 registered ECC module with 2Rx4 rank, 1.1 V operation and CL46 latency, validated for the Supermicro H13DSH motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

Visa 30 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • 128 GB capacity runs at full rated speed
  • DDR5 5600 (PC5-44800) matches the controller spec exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.1 V voltage match the motherboard requirements
  • Verified fitment for Supermicro H13DSH motherboard

128GB DDR5 5600 ECC RDIMM

This 128GB DDR5 5600 registered ECC module targets administrators upgrading a Supermicro H13DSH platform. The 2Rx4 organization and CL46 timing match the board's native memory controller expectations so the full capacity is recognized at rated speed.

288-pin registered form factor

The 288-pin RDIMM form factor is the only type the H13DSH accepts, not UDIMM or SODIMM. Registered architecture buffers address and command signals, allowing every slot to be populated at full capacity without overloading the controller. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Sustained enterprise workloads

Operating at 1.1V, the module maintains stability during continuous server workloads rather than short bursts. Registered buffering and on-die ECC keep signal integrity consistent across fully populated channels, reducing unplanned reboots in production environments.

I korthet

  • 128 GB capacity runs at full rated speed
  • DDR5 5600 (PC5-44800) matches the controller spec exactly
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 rank and 1.1 V voltage match the motherboard requirements
  • Verified fitment for Supermicro H13DSH motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How many DIMM slots does the Supermicro H13DSH board provide for this 128 GB DDR5-5600 kit?

The Supermicro H13DSH motherboard is a dual-socket SP5 platform with 12 DDR5 RDIMM slots per socket, giving 24 slots total. This 128 GB module occupies one slot; full population would require 24 identical modules.

Does the registered ECC design keep power draw low enough for continuous 24/7 server operation?

Each module runs at the standard DDR5 1.10 V and uses a registered buffer that off-loads the memory controller. That combination is what enterprise platforms expect for sustained full-capacity operation without thermal throttling.

What motherboard revision or BIOS version must already be installed for this DDR5-5600 RDIMM to be recognised at full speed?

Supermicro specifies the H13DSH for DDR5-5600 registered ECC DIMMs. The board’s memory controller and SPD hub will train the module at 5600 MT/s CL46 2Rx4 1.10 V provided the BIOS supports the SP5 memory reference code for that speed grade.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.