Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-WZJR-XCKWT

128 GB DDR5 4800 registered ECC RDIMM, 2Rx4 CL40 1.1 V, built for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Visa 30 fler konfigurationer
  • 128 GB DDR5-4800 capacity for memory-intensive server workloads
  • Registered ECC architecture prevents silent data corruption in production
  • CL40 latency at 1.1 V matches board memory-controller requirements
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU-D slots
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise-grade stability

128GB DDR5-4800 ECC RDIMM for Supermicro H13DSG

This 128GB registered ECC module runs at DDR5-4800 with CL40 latency and 1.1V operation. It targets administrators upgrading the Supermicro H13DSG-O-CPU-D motherboard where full-capacity population and data integrity are required. The 2Rx4 organisation matches the board's memory-controller expectations exactly.

Replaces partial or mixed-capacity kits

The jump is worth it when the server currently runs fewer than the maximum supported DIMMs or mixes ranks that force the controller to downclock. A matched 2Rx4 registered kit lets every slot run at the rated 4800MT/s without manual timing adjustments and maintains ECC correction across the full 128GB.

Fits 288-pin RDIMM slots on the H13DSG-O-CPU-D

The module needs no heat spreader and draws 1.1V, so it works within the board's standard power budget. It frees the memory controller from driving unbuffered loads, allowing full-slot population while ECC handles single-bit errors transparently. Verify the manual for approved population order before installing.

I korthet

  • 128 GB DDR5-4800 capacity for memory-intensive server workloads
  • Registered ECC architecture prevents silent data corruption in production
  • CL40 latency at 1.1 V matches board memory-controller requirements
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU-D slots
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise-grade stability

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this 288-pin DDR5 RDIMM fit the memory slots on my Supermicro H13DSG-O-CPU-D motherboard?

Yes, the module is a 288-pin registered DDR5 RDIMM built to the exact form factor that the Supermicro H13DSG-O-CPU-D requires; it is not a UDIMM or SODIMM and will seat correctly in the board's DDR5 slots.

What is the correct installation sequence for populating all slots with these 2Rx4 registered ECC modules?

Install the RDIMMs in the order specified by the Supermicro H13DSG-O-CPU-D manual, typically filling the primary channel slots first; the registered buffer allows full-speed operation when every slot is populated, but skipping the prescribed sequence can prevent the system from posting.

How do I know when a 128GB 2Rx4 ECC RDIMM needs replacement in a production server?

Monitor the system logs for corrected ECC events; a rising count of single-bit corrections or any uncorrectable multi-bit error reported by the BMC or OS indicates the module should be swapped before it causes downtime.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.