暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 2Rx4 ECC RDIMM Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-WZJR-XCKWT

128 GB DDR5 4800 registered ECC RDIMM, 2Rx4 CL40 1.1 V, built for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 128 GB DDR5-4800 capacity for memory-intensive server workloads
  • Registered ECC architecture prevents silent data corruption in production
  • CL40 latency at 1.1 V matches board memory-controller requirements
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU-D slots
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise-grade stability

128GB DDR5-4800 ECC RDIMM for Supermicro H13DSG

This 128GB registered ECC module runs at DDR5-4800 with CL40 latency and 1.1V operation. It targets administrators upgrading the Supermicro H13DSG-O-CPU-D motherboard where full-capacity population and data integrity are required. The 2Rx4 organisation matches the board's memory-controller expectations exactly.

Replaces partial or mixed-capacity kits

The jump is worth it when the server currently runs fewer than the maximum supported DIMMs or mixes ranks that force the controller to downclock. A matched 2Rx4 registered kit lets every slot run at the rated 4800MT/s without manual timing adjustments and maintains ECC correction across the full 128GB.

Fits 288-pin RDIMM slots on the H13DSG-O-CPU-D

The module needs no heat spreader and draws 1.1V, so it works within the board's standard power budget. It frees the memory controller from driving unbuffered loads, allowing full-slot population while ECC handles single-bit errors transparently. Verify the manual for approved population order before installing.

特長

  • 128 GB DDR5-4800 capacity for memory-intensive server workloads
  • Registered ECC architecture prevents silent data corruption in production
  • CL40 latency at 1.1 V matches board memory-controller requirements
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU-D slots
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise-grade stability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 288-pin DDR5 RDIMM fit the memory slots on my Supermicro H13DSG-O-CPU-D motherboard?

Yes, the module is a 288-pin registered DDR5 RDIMM built to the exact form factor that the Supermicro H13DSG-O-CPU-D requires; it is not a UDIMM or SODIMM and will seat correctly in the board's DDR5 slots.

What is the correct installation sequence for populating all slots with these 2Rx4 registered ECC modules?

Install the RDIMMs in the order specified by the Supermicro H13DSG-O-CPU-D manual, typically filling the primary channel slots first; the registered buffer allows full-speed operation when every slot is populated, but skipping the prescribed sequence can prevent the system from posting.

How do I know when a 128GB 2Rx4 ECC RDIMM needs replacement in a production server?

Monitor the system logs for corrected ECC events; a rising count of single-bit corrections or any uncorrectable multi-bit error reported by the BMC or OS indicates the module should be swapped before it causes downtime.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。