暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-XT71-6CVKF

32 GB DDR5 4800 registered ECC RDIMM built for the Supermicro H14DST-FL motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 32 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard slots

Exact-fit DDR5 ECC RDIMM upgrade

This 32GB NEMIX RAM module is a system-specific DDR5-4800 (PC5-38400) Registered ECC RDIMM built for the Supermicro H14DST-FL motherboard. It runs at 1.1V with CL40 timing and a 2Rx8 organisation across 288 pins, matching the board's memory-controller requirements precisely.

Suited for verified Supermicro H14DST-FL

Ideal for administrators populating approved DIMM slots on this exact motherboard where registered ECC memory is required. Not suitable for systems that accept only unbuffered UDIMMs or SODIMMs, platforms needing a different DDR generation, or builds where the manual specifies a different rank, voltage, or population order.

2Rx8 registered ECC at 1.1V decides fit

The single specification that determines compatibility is the 2Rx8 registered ECC architecture at 1.1V on a 288-pin DDR5 RDIMM. If your motherboard manual calls for this exact rank, buffering type, error-correction, and voltage combination the module will be recognised at full capacity and rated speed; otherwise it will not function.

特長

  • 32 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard slots

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the kit include only the 32GB DDR5 4800 CL40 2Rx8 ECC RDIMM module or are extra parts supplied?

The package contains a single 32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V CL40 288-pin ECC Registered RDIMM. No additional components are included.

Why is the 2Rx8 registered ECC version the correct choice for the Supermicro H14DST-FL instead of a UDIMM or SODIMM?

The H14DST-FL requires 288-pin registered RDIMMs; UDIMMs and SODIMMs are physically and electrically incompatible. The 2Rx8 organisation and 1.1V operation match the board's memory-controller expectations.

What does the CL40 4800MHz rating mean once the module is installed in the server?

The module runs at 4800 MT/s with a CAS latency of 40 cycles at 1.1V. The registered buffer and ECC let every slot operate fully populated at this rated speed while correcting single-bit errors.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。