Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR5 memory module with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-XT71-6CVKF

32 GB DDR5 4800 registered ECC RDIMM built for the Supermicro H14DST-FL motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB

Nog 30 configuraties tonen
  • 32 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard slots

Exact-fit DDR5 ECC RDIMM upgrade

This 32GB NEMIX RAM module is a system-specific DDR5-4800 (PC5-38400) Registered ECC RDIMM built for the Supermicro H14DST-FL motherboard. It runs at 1.1V with CL40 timing and a 2Rx8 organisation across 288 pins, matching the board's memory-controller requirements precisely.

Suited for verified Supermicro H14DST-FL

Ideal for administrators populating approved DIMM slots on this exact motherboard where registered ECC memory is required. Not suitable for systems that accept only unbuffered UDIMMs or SODIMMs, platforms needing a different DDR generation, or builds where the manual specifies a different rank, voltage, or population order.

2Rx8 registered ECC at 1.1V decides fit

The single specification that determines compatibility is the 2Rx8 registered ECC architecture at 1.1V on a 288-pin DDR5 RDIMM. If your motherboard manual calls for this exact rank, buffering type, error-correction, and voltage combination the module will be recognised at full capacity and rated speed; otherwise it will not function.

Pluspunten

  • 32 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the board's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DST-FL motherboard slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the kit include only the 32GB DDR5 4800 CL40 2Rx8 ECC RDIMM module or are extra parts supplied?

The package contains a single 32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V CL40 288-pin ECC Registered RDIMM. No additional components are included.

Why is the 2Rx8 registered ECC version the correct choice for the Supermicro H14DST-FL instead of a UDIMM or SODIMM?

The H14DST-FL requires 288-pin registered RDIMMs; UDIMMs and SODIMMs are physically and electrically incompatible. The 2Rx8 organisation and 1.1V operation match the board's memory-controller expectations.

What does the CL40 4800MHz rating mean once the module is installed in the server?

The module runs at 4800 MT/s with a CAS latency of 40 cycles at 1.1V. The registered buffer and ECC let every slot operate fully populated at this rated speed while correcting single-bit errors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.