Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts and black chips

NEMIX RAM

NEMIX RAM DDR5 192GB 2x96GB 4800MHz ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-2Q38-182XA

Adds 192 GB of DDR5 ECC registered memory in a matched 2 x 96 GB kit for the Supermicro H13DSG-OM motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Nog 30 configuraties tonen
  • 192GB total capacity in a 2 x 96GB kit for maximum server density
  • DDR5-4800 PC5-38400 speed matches the memory controller specification exactly
  • Registered ECC RDIMM with 2Rx4 organisation corrects single-bit errors on the fly
  • 1V operation at CL40 latency delivers rated performance without tuning
  • Verified fitment for Supermicro H13DSG-OM motherboard using 288-pin RDIMM form factor

Purpose-built server upgrade

This 192GB kit delivers two 96GB DDR5 ECC Registered DIMMs validated for the Supermicro H13DSG-OM motherboard. It targets administrators who need maximum registered capacity on that platform without mixing ranks or voltages.

Replacing partial or mixed populations

The jump is worth it when your board currently runs fewer than the full complement of 2Rx4 modules at 1.1V CL40 and you require the full 192GB at the native 4800MHz data rate. It is not for systems limited to lower registered capacities, unbuffered DIMM slots, or workloads that demand speeds beyond PC5-38400.

Guided installation, strict population rules

Insert each 288-pin module into the exact slots specified in the H13DSG-OM manual following the approved population order. What usually goes wrong is ignoring the board's slot sequence, mixing ranks, or skipping the BIOS memory training step, which prevents the kit from initializing at its rated timings.

Pluspunten

  • 192GB total capacity in a 2 x 96GB kit for maximum server density
  • DDR5-4800 PC5-38400 speed matches the memory controller specification exactly
  • Registered ECC RDIMM with 2Rx4 organisation corrects single-bit errors on the fly
  • 1V operation at CL40 latency delivers rated performance without tuning
  • Verified fitment for Supermicro H13DSG-OM motherboard using 288-pin RDIMM form factor

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will these 288-pin DDR5 RDIMMs physically fit the Supermicro H13DSG-OM motherboard slots?

Yes, the 288-pin RDIMM form factor matches the motherboard's DDR5 memory slots exactly. The kit is spec-matched to the board's memory-population rules for proper fitment.

What is the correct installation sequence for the two 96GB modules on the H13DSG-OM, and which step is commonly missed?

Install the modules in the DIMM population order specified in the Supermicro H13DSG-OM manual. The step often missed is verifying the approved slot sequence for a 2-module configuration before seating them.

When will the ECC Registered RDIMM modules need replacement under typical server workloads?

These modules are built for continuous enterprise operation with ECC error correction and registered architecture. They are backed by a lifetime replacement warranty, so replacement is only needed if a hardware fault occurs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.