暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 4800 CL40 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-6J1X-H6G0V

256 GB registered ECC DDR5 kit in four 64 GB modules at 4800 MT/s CL40, validated for Supermicro H13DSH motherboards

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

他に 30点の構成を表示
  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank aligns with the memory controller's exact requirements
  • Verified fitment for Supermicro H13DSH motherboard using 288-pin RDIMM form factor

Exact DDR5-4800 RDIMM kit for Supermicro H13DSH

This 256GB kit contains four 64GB DDR5 4800 CL40 registered ECC modules built to 1.10V and 2Rx4 rank. The 288-pin RDIMM form factor matches the Supermicro H13DSH motherboard requirements so the system recognises the full capacity at rated speed without manual tuning.

DDR5-4800 bandwidth ceiling

DDR5 4800 delivers PC5-38400 throughput while the CL40 latency and registered buffer add one cycle per command. Full population of all slots at this speed is the practical ceiling for the platform; exceeding the rated frequency or mixing ranks will force the controller to downclock.

Verify DIMM population rules

Consult the Supermicro H13DSH manual for approved capacity per channel, required slot sequence and any BIOS version needed for 256GB operation. The board accepts only registered ECC RDIMMs; unbuffered or non-ECC modules will not function.

特長

  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank aligns with the memory controller's exact requirements
  • Verified fitment for Supermicro H13DSH motherboard using 288-pin RDIMM form factor

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I buy the 256 GB kit or a smaller capacity for my Supermicro H13DSH?

The kit provides 256 GB across four 64 GB modules, filling four slots with the 2Rx4 registered ECC configuration the board expects for full-capacity operation at DDR5-4800.

What does the DDR5-4800 CL40 rating mean when the modules are installed?

The memory runs at 4800 MT/s with a CAS latency of 40 cycles at 1.10 V, delivering PC5-38400 bandwidth while the registered buffer and ECC maintain stability under full load.

Is the 288-pin RDIMM interface compatible with my motherboard's memory slots?

Yes, the 288-pin registered DIMM form factor matches the Supermicro H13DSH's DDR5 RDIMM slots, and the 2Rx4 organization complies with the board's population rules for recognized capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。