저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 256GB 4x64GB DDR5 4800 CL40 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-6J1X-H6G0V

256 GB registered ECC DDR5 kit in four 64 GB modules at 4800 MT/s CL40, validated for Supermicro H13DSH motherboards

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

구성 30개 더 보기
  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank aligns with the memory controller's exact requirements
  • Verified fitment for Supermicro H13DSH motherboard using 288-pin RDIMM form factor

Exact DDR5-4800 RDIMM kit for Supermicro H13DSH

This 256GB kit contains four 64GB DDR5 4800 CL40 registered ECC modules built to 1.10V and 2Rx4 rank. The 288-pin RDIMM form factor matches the Supermicro H13DSH motherboard requirements so the system recognises the full capacity at rated speed without manual tuning.

DDR5-4800 bandwidth ceiling

DDR5 4800 delivers PC5-38400 throughput while the CL40 latency and registered buffer add one cycle per command. Full population of all slots at this speed is the practical ceiling for the platform; exceeding the rated frequency or mixing ranks will force the controller to downclock.

Verify DIMM population rules

Consult the Supermicro H13DSH manual for approved capacity per channel, required slot sequence and any BIOS version needed for 256GB operation. The board accepts only registered ECC RDIMMs; unbuffered or non-ECC modules will not function.

주요 특징

  • 256 GB total capacity from four 64 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at 2Rx4 rank aligns with the memory controller's exact requirements
  • Verified fitment for Supermicro H13DSH motherboard using 288-pin RDIMM form factor

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Should I buy the 256 GB kit or a smaller capacity for my Supermicro H13DSH?

The kit provides 256 GB across four 64 GB modules, filling four slots with the 2Rx4 registered ECC configuration the board expects for full-capacity operation at DDR5-4800.

What does the DDR5-4800 CL40 rating mean when the modules are installed?

The memory runs at 4800 MT/s with a CAS latency of 40 cycles at 1.10 V, delivering PC5-38400 bandwidth while the registered buffer and ECC maintain stability under full load.

Is the 288-pin RDIMM interface compatible with my motherboard's memory slots?

Yes, the 288-pin registered DIMM form factor matches the Supermicro H13DSH's DDR5 RDIMM slots, and the 2Rx4 organization complies with the board's population rules for recognized capacity.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.