Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR3 laptop memory modules with gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM Kit

SKU CH-ZZEH-ZP7DS

Two 8 GB DDR3 SO-DIMM modules running at 1333 MHz with CL9 latency and 1.35 V operation

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16GB kit (2×8GB) doubles laptop memory capacity
  • DDR3 1333MHz PC3-10600 CL9 speed matches system spec
  • Low 1.35V voltage reduces power draw and heat
  • 204-pin SODIMM form factor fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility

NEMIX RAM 16GB DDR3 SODIMM Kit

This kit provides 16GB of DDR3 laptop memory in two 8GB modules. It suits owners of laptops, all-in-one PCs, small-form-factor desktops or NAS devices that accept 204-pin SODIMMs. The modules run at 1333MHz with CL9 latency and operate without ECC or buffering.

Installing the modules in compatible slots

Installation is a typical user-replaceable upgrade that takes a few minutes; refer to the device manual for exact steps. Ensure the system supports 1.35V low-voltage DDR3, because the kit is rated at 1.50V and a voltage mismatch can prevent booting. Handle modules by the edges to avoid static damage.

Verify slot count and voltage before ordering

Check that your device has two free 204-pin DDR3 SODIMM slots and that its memory controller accepts 1.35V operation. Confirm the maximum supported speed per slot matches 1333MHz and that the platform does not require ECC or registered modules. Systems needing registered memory or a different DDR generation will not work with this kit.

Puncte forte

  • 16GB kit (2×8GB) doubles laptop memory capacity
  • DDR3 1333MHz PC3-10600 CL9 speed matches system spec
  • Low 1.35V voltage reduces power draw and heat
  • 204-pin SODIMM form factor fits standard laptop slots
  • Non-ECC unbuffered design ensures broad compatibility

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory
ModelDDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMS10600-828LK2
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I verify the kit is running at PC3-10600 1333 MHz after installation?

Open Task Manager or CPU-Z and confirm each 8 GB module shows 1333 MHz and CL9 timings at 1.50 V.

What does the 16 GB kit contain and is anything else required?

Two 204-pin DDR3 SODIMM modules; no extra cables, brackets or heat spreaders are needed.

Should I choose the 1.35 V or 1.50 V version for my laptop?

The modules operate at 1.50 V; select this kit when your system specifies standard DDR3 voltage.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.