Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 240-Pin UDIMM

SKU CH-AE71-0M5YA

An 8 GB DDR3 desktop module running at 1333 MHz with CL9 latency and 1.50 V operation

  • Capacity8GB
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 8GB

  • Boosts system responsiveness with 8GB DDR3 1333 speed
  • Low 1.35V operation cuts power draw and heat
  • Standard 240-pin UDIMM fits most desktop motherboards
  • Built from major OEM chips for reliable compatibility
  • CL9 latency supports smooth everyday multitasking

8GB DDR3 1333 Desktop Module

This 8GB DDR3 UDIMM runs at 1333 MT/s with a CL9 latency. It fits standard 240-pin desktop sockets and operates at 1.50V. The module uses major OEM chips from Samsung, Micron or Hynix. It is built for non-ECC unbuffered platforms.

Unbuffered 240-Pin Build

The stick has no heat spreader, keeping the profile low for tight CPU cooler clearances. Gold edge contacts on the 240-pin connector resist oxidation and ensure reliable seating. Unbuffered design means direct connection to the memory controller without a register. Single-rank 2Rx8 organisation suits most consumer boards.

DDR3 Voltage and Speed Limits

DDR3 tops out at 1.50V standard voltage, so this module stays within spec without overclocking headroom. The 1333 MT/s ceiling is the JEDEC maximum for this generation. Boards limited to 1.35V low-voltage DDR3 may not support this stick. Capacity per DIMM is capped by DDR3 density limits.

Puncte forte

  • Boosts system responsiveness with 8GB DDR3 1333 speed
  • Low 1.35V operation cuts power draw and heat
  • Standard 240-pin UDIMM fits most desktop motherboards
  • Built from major OEM chips for reliable compatibility
  • CL9 latency supports smooth everyday multitasking

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-828LK1
Capacity8GB
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the PC3-10600 rating limit real-world throughput to 10600 MB/s?

The PC3-10600 designation means the module is rated for a peak transfer rate of 10600 MB/s at 1333 MHz; actual throughput will be lower due to latency and controller overhead.

Will the 240-pin UDIMM fit my desktop motherboard slot?

This module uses the standard 240-pin DDR3 UDIMM form factor, so it fits any desktop DIMM socket keyed for DDR3.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, press straight down until both side clips click shut; the step often missed is verifying both clips have fully engaged.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.