BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277926BTC
În stoc
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 UDIMM Supermicro MBD-C9Z390CG-IW
A 16 GB DDR4 2666 CL19 dual-channel kit built for the Supermicro MBD-C9Z390CG-IW workstation board
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 MHz CL19 delivers responsive system performance
- 20 V low-voltage operation reduces power draw
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for Supermicro MBD-C9Z390CG-IW workstation motherboard
Supermicro MBD-C9Z390CG-IW 16GB DDR4 kit
This 16GB kit contains two 8GB DDR4 2666 UDIMM modules built for the Supermicro MBD-C9Z390CG-IW motherboard. It runs at 1.20V with CL19 latency and uses unbuffered non-ECC chips. The 288-pin DIMMs install directly into the board's desktop memory slots.
Suitable for owners of this specific Supermicro
Builders using the MBD-C9Z390CG-IW who need a matched pair of 8GB modules will find the correct speed, voltage and pin-out here. Buyers who want ECC error correction, registered buffering, higher capacities per slot or a different DDR generation should look at other memory lines.
DDR4 2666 CL19 1.20V 288-pin unbuffered non-ECC
The single specification that decides fit is the combination of DDR4 2666 speed, CL19 timing, 1.20V operation, 288-pin UDIMM form factor and non-ECC unbuffered design. Only modules matching all five attributes will work in the MBD-C9Z390CG-IW.
Puncte forte
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 MHz CL19 delivers responsive system performance
- 20 V low-voltage operation reduces power draw
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for Supermicro MBD-C9Z390CG-IW workstation motherboard
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
Întrebări despre acest articol
How do I verify the kit is running at 2666 MHz and CL19 after installation?
Enter the BIOS or UEFI and confirm the memory frequency shows 2666 MHz with timings set to 19-19-19 at 1.20 V.
What is included in the package and do I need any extra parts?
The box contains two 8 GB 288-pin DDR4 UDIMM modules; no additional components are required for installation.
Why choose the 16 GB (2×8 GB) CL19 kit over other capacities?
This kit matches the Supermicro MBD-C9Z390CG-IW qualified configuration of 16 GB total capacity at DDR4 2666 with CL19 latency.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
