We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 UDIMM Supermicro MBD-C9Z390CG-IW

SKU CH-XS8D-HK60M

A 16 GB DDR4 2666 CL19 dual-channel kit built for the Supermicro MBD-C9Z390CG-IW workstation board

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 MHz CL19 delivers responsive system performance
  • 20 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for Supermicro MBD-C9Z390CG-IW workstation motherboard

Supermicro MBD-C9Z390CG-IW 16GB DDR4 kit

This 16GB kit contains two 8GB DDR4 2666 UDIMM modules built for the Supermicro MBD-C9Z390CG-IW motherboard. It runs at 1.20V with CL19 latency and uses unbuffered non-ECC chips. The 288-pin DIMMs install directly into the board's desktop memory slots.

Suitable for owners of this specific Supermicro

Builders using the MBD-C9Z390CG-IW who need a matched pair of 8GB modules will find the correct speed, voltage and pin-out here. Buyers who want ECC error correction, registered buffering, higher capacities per slot or a different DDR generation should look at other memory lines.

DDR4 2666 CL19 1.20V 288-pin unbuffered non-ECC

The single specification that decides fit is the combination of DDR4 2666 speed, CL19 timing, 1.20V operation, 288-pin UDIMM form factor and non-ECC unbuffered design. Only modules matching all five attributes will work in the MBD-C9Z390CG-IW.

Highlights

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 MHz CL19 delivers responsive system performance
  • 20 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for Supermicro MBD-C9Z390CG-IW workstation motherboard

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

How do I verify the kit is running at 2666 MHz and CL19 after installation?

Enter the BIOS or UEFI and confirm the memory frequency shows 2666 MHz with timings set to 19-19-19 at 1.20 V.

What is included in the package and do I need any extra parts?

The box contains two 8 GB 288-pin DDR4 UDIMM modules; no additional components are required for installation.

Why choose the 16 GB (2×8 GB) CL19 kit over other capacities?

This kit matches the Supermicro MBD-C9Z390CG-IW qualified configuration of 16 GB total capacity at DDR4 2666 with CL19 latency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.