BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279455BTC
În stoc
NEMIX RAM
NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V 260-PIN SODIMM POSIFLEX RT-6016 memory upgrade
16 GB DDR4 2400 SODIMM with CL17 timing and 1.2 V operation for POSIFLEX RT-6016 terminals
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB DDR4 SODIMM expands POSIFLEX RT-6016 capacity
- 2400MHz PC4-19200 speed matches terminal specification
- CL17 latency at 1.2V reduces power draw
- 2Rx8 rank with major OEM chips ensures stability
- 260-pin non-ECC unbuffered design fits POSIFLEX slot
POSIFLEX RT-6016 DDR4 SODIMM upgrade
This 16GB DDR4 module is built specifically for the POSIFLEX RT-6016 stylish slim terminal. It targets IT professionals and system integrators who need a direct, validated memory replacement for point-of-sale or kiosk deployments. The single-module design fills one slot and matches the platform’s native DDR4 specification.
Unbuffered 260-pin build with major-brand chips
The stick uses a standard 260-pin SODIMM edge connector and runs at 1.20V without a heat spreader, keeping the profile low enough for slim enclosures. It is assembled with Samsung, Micron or Hynix components in a 2Rx8 unbuffered non-ECC layout, so it installs like any ordinary laptop module and requires no special tools or configuration.
DDR4 2400 CL17 limits bandwidth to PC4-19200
The DDR4 2400 interface caps throughput at the PC4-19200 data rate, and the CL17 latency fixes timing overhead for this speed grade. Systems that demand higher memory clocks, lower latency or ECC protection cannot be satisfied by this module, and terminals with only one SODIMM slot gain no further expansion headroom.
Puncte forte
- 16GB DDR4 SODIMM expands POSIFLEX RT-6016 capacity
- 2400MHz PC4-19200 speed matches terminal specification
- CL17 latency at 1.2V reduces power draw
- 2Rx8 rank with major OEM chips ensures stability
- 260-pin non-ECC unbuffered design fits POSIFLEX slot
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
What DDR4 speed and PC4 rating does this SODIMM use?
It runs at DDR4 2400 with a PC4-19200 rating, matching the memory controller speed supported by the POSIFLEX RT-6016 terminal.
What physical slot and pin count does this module require?
It uses a 260-pin DDR4 SODIMM slot, the standard socket found in the POSIFLEX RT-6016 slim terminal.
How is the module installed, and what step is often missed?
Power off the terminal, open the memory cover, insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into place.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
