我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green printed circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 2Rx8 1.2V 260-PIN SODIMM POSIFLEX RT-6016 memory upgrade

SKU CH-K3MD-05GM2

16 GB DDR4 2400 SODIMM with CL17 timing and 1.2 V operation for POSIFLEX RT-6016 terminals

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 SODIMM expands POSIFLEX RT-6016 capacity
  • 2400MHz PC4-19200 speed matches terminal specification
  • CL17 latency at 1.2V reduces power draw
  • 2Rx8 rank with major OEM chips ensures stability
  • 260-pin non-ECC unbuffered design fits POSIFLEX slot

POSIFLEX RT-6016 DDR4 SODIMM upgrade

This 16GB DDR4 module is built specifically for the POSIFLEX RT-6016 stylish slim terminal. It targets IT professionals and system integrators who need a direct, validated memory replacement for point-of-sale or kiosk deployments. The single-module design fills one slot and matches the platform’s native DDR4 specification.

Unbuffered 260-pin build with major-brand chips

The stick uses a standard 260-pin SODIMM edge connector and runs at 1.20V without a heat spreader, keeping the profile low enough for slim enclosures. It is assembled with Samsung, Micron or Hynix components in a 2Rx8 unbuffered non-ECC layout, so it installs like any ordinary laptop module and requires no special tools or configuration.

DDR4 2400 CL17 limits bandwidth to PC4-19200

The DDR4 2400 interface caps throughput at the PC4-19200 data rate, and the CL17 latency fixes timing overhead for this speed grade. Systems that demand higher memory clocks, lower latency or ECC protection cannot be satisfied by this module, and terminals with only one SODIMM slot gain no further expansion headroom.

商品特色

  • 16GB DDR4 SODIMM expands POSIFLEX RT-6016 capacity
  • 2400MHz PC4-19200 speed matches terminal specification
  • CL17 latency at 1.2V reduces power draw
  • 2Rx8 rank with major OEM chips ensures stability
  • 260-pin non-ECC unbuffered design fits POSIFLEX slot

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

商品問答

What DDR4 speed and PC4 rating does this SODIMM use?

It runs at DDR4 2400 with a PC4-19200 rating, matching the memory controller speed supported by the POSIFLEX RT-6016 terminal.

What physical slot and pin count does this module require?

It uses a 260-pin DDR4 SODIMM slot, the standard socket found in the POSIFLEX RT-6016 slim terminal.

How is the module installed, and what step is often missed?

Power off the terminal, open the memory cover, insert the SODIMM at an angle until the gold contacts disappear, then press down firmly until both side clips click into place.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。