Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green bare circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 CL21 1.2V 288-Pin UDIMM desktop RAM

SKU CH-6H7R-X62Q8

16 GB DDR4 desktop module running at 2933 MT/s with CL21 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 16GB

  • 16 GB capacity handles demanding workloads smoothly
  • DDR4 2933 speed delivers responsive system performance
  • CL21 latency ensures efficient data access timing
  • 20 V operation reduces power consumption and heat
  • 288-pin UDIMM design fits standard desktop motherboards

16GB DDR4 2933 UDIMM for desktop upgrades

This NEMIX RAM module adds 16GB of DDR4 memory running at 2933 MT/s with CL21 latency. It uses a standard 288-pin UDIMM form factor and operates at 1.2V. The stick is unbuffered and non-ECC, making it suitable for typical desktop motherboards.

Original Series DDR4 compatibility focus

The module is built with major OEM chips from Samsung, Micron or Hynix. It carries the MD23400-628K1 part number and targets broad motherboard compatibility. No heat spreader or LEDs are included, keeping the profile low for tight slots.

Unbuffered non-ECC build with 288-pin connector

The green PCB uses a 2Rx8 organisation and has no heat spreader, so clearance is minimal. Gold-edge 288-pin connectors seat directly into DDR4 DIMM slots. The 1.20V rating matches standard DDR4 voltage for straightforward installation.

Puncte forte

  • 16 GB capacity handles demanding workloads smoothly
  • DDR4 2933 speed delivers responsive system performance
  • CL21 latency ensures efficient data access timing
  • 20 V operation reduces power consumption and heat
  • 288-pin UDIMM design fits standard desktop motherboards

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 16GB DDR4 module ever need its heat spreader replaced?

This module ships without a heat spreader, so there is no spreader to replace; the bare PCB relies on case airflow for cooling.

What limits sustained throughput first on this 2933 CL21 stick?

The rated 2933 MT/s speed and CL21 latency set the bandwidth ceiling; the memory controller cannot push data faster than the JEDEC spec allows.

How much heat and power does the 1.2V DDR4 kit produce during all-day workloads?

At 1.20 V the module draws minimal power and generates little heat; adequate case ventilation is sufficient for continuous operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.