Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green bare circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 CL21 1.2V 288-Pin UDIMM desktop RAM

SKU CH-6H7R-X62Q8

16 GB DDR4 desktop module running at 2933 MT/s with CL21 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 16GB

  • 16 GB capacity handles demanding workloads smoothly
  • DDR4 2933 speed delivers responsive system performance
  • CL21 latency ensures efficient data access timing
  • 20 V operation reduces power consumption and heat
  • 288-pin UDIMM design fits standard desktop motherboards

16GB DDR4 2933 UDIMM for desktop upgrades

This NEMIX RAM module adds 16GB of DDR4 memory running at 2933 MT/s with CL21 latency. It uses a standard 288-pin UDIMM form factor and operates at 1.2V. The stick is unbuffered and non-ECC, making it suitable for typical desktop motherboards.

Original Series DDR4 compatibility focus

The module is built with major OEM chips from Samsung, Micron or Hynix. It carries the MD23400-628K1 part number and targets broad motherboard compatibility. No heat spreader or LEDs are included, keeping the profile low for tight slots.

Unbuffered non-ECC build with 288-pin connector

The green PCB uses a 2Rx8 organisation and has no heat spreader, so clearance is minimal. Gold-edge 288-pin connectors seat directly into DDR4 DIMM slots. The 1.20V rating matches standard DDR4 voltage for straightforward installation.

Pluspunten

  • 16 GB capacity handles demanding workloads smoothly
  • DDR4 2933 speed delivers responsive system performance
  • CL21 latency ensures efficient data access timing
  • 20 V operation reduces power consumption and heat
  • 288-pin UDIMM design fits standard desktop motherboards

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 16GB DDR4 module ever need its heat spreader replaced?

This module ships without a heat spreader, so there is no spreader to replace; the bare PCB relies on case airflow for cooling.

What limits sustained throughput first on this 2933 CL21 stick?

The rated 2933 MT/s speed and CL21 latency set the bandwidth ceiling; the memory controller cannot push data faster than the JEDEC spec allows.

How much heat and power does the 1.2V DDR4 kit produce during all-day workloads?

At 1.20 V the module draws minimal power and generates little heat; adequate case ventilation is sufficient for continuous operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.