Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board with black memory chips, no heat spreader, 288 gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM memory upgrade for ASUS ProArt Z890-CREATOR WiFi

SKU CH-EH97-G8CZ7

16 GB DDR5 5600 CL46 1.10 V UDIMM validated for the ASUS ProArt Z890-CREATOR WiFi motherboard

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 boosts multitasking speed
  • CL46 latency keeps data flowing smoothly
  • 1 V operation lowers system power draw
  • 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi
  • Single 16 GB module simplifies future expansion

16 GB DDR5 5600 UDIMM for ASUS ProArt Z890-CREATOR

This 16 GB DDR5 5600 module is built specifically for the ASUS ProArt Z890-CREATOR WiFi motherboard. It runs at 1.1 V with CL46 timing and uses a single-rank 1Rx8 layout. The 288-pin unbuffered non-ECC design fits the board's desktop memory slots without additional configuration.

Suits single-slot upgrades.

The module targets users adding 16 GB to a compatible ProArt Z890-CREATOR WiFi system. Builders who require error-correcting code memory or registered DIMMs for server or workstation platforms should look at a different memory type.

Deciding spec: 288-pin DDR5 5600 CL46 1.1 V

Match the motherboard's DDR5 slot, 5600 MT/s speed, CL46 latency, 1.1 V voltage and unbuffered non-ECC requirement. If any of these values differ from the board's specification the module will not operate correctly.

Puncte forte

  • 16 GB DDR5 5600 boosts multitasking speed
  • CL46 latency keeps data flowing smoothly
  • 1 V operation lowers system power draw
  • 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi
  • Single 16 GB module simplifies future expansion

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASUS
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM

Întrebări despre acest articol

Should I choose the 16 GB module or add a second stick for dual-channel on the ASUS ProArt Z890-CREATOR WiFi?

The board supports dual-channel; adding a second identical 16 GB stick will double bandwidth while keeping DDR5 5600 CL46 1.10 V timings.

What does the 5600 MT/s rating deliver once installed in the ProArt Z890-CREATOR WiFi?

The module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, giving the rated throughput without manual tuning.

Does the 288-pin DDR5 UDIMM fit the ProArt Z890-CREATOR WiFi DIMM slots and what speed ceiling applies?

Yes — the 288-pin DDR5 UDIMM matches the board's DDR5 slots; the JEDEC ceiling is 5600 MT/s unless the BIOS enables higher profiles.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.