Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips, no heat spreader, 288 gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V 288-pin UDIMM memory upgrade for ASUS ProArt Z890-CREATOR WiFi

SKU CH-EH97-G8CZ7

16 GB DDR5 5600 CL46 1.10 V UDIMM validated for the ASUS ProArt Z890-CREATOR WiFi motherboard

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5600 boosts multitasking speed
  • CL46 latency keeps data flowing smoothly
  • 1 V operation lowers system power draw
  • 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi
  • Single 16 GB module simplifies future expansion

16 GB DDR5 5600 UDIMM for ASUS ProArt Z890-CREATOR

This 16 GB DDR5 5600 module is built specifically for the ASUS ProArt Z890-CREATOR WiFi motherboard. It runs at 1.1 V with CL46 timing and uses a single-rank 1Rx8 layout. The 288-pin unbuffered non-ECC design fits the board's desktop memory slots without additional configuration.

Suits single-slot upgrades.

The module targets users adding 16 GB to a compatible ProArt Z890-CREATOR WiFi system. Builders who require error-correcting code memory or registered DIMMs for server or workstation platforms should look at a different memory type.

Deciding spec: 288-pin DDR5 5600 CL46 1.1 V

Match the motherboard's DDR5 slot, 5600 MT/s speed, CL46 latency, 1.1 V voltage and unbuffered non-ECC requirement. If any of these values differ from the board's specification the module will not operate correctly.

Pluspunten

  • 16 GB DDR5 5600 boosts multitasking speed
  • CL46 latency keeps data flowing smoothly
  • 1 V operation lowers system power draw
  • 288-pin UDIMM fits the ASUS ProArt Z890-CREATOR WiFi
  • Single 16 GB module simplifies future expansion

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASUS
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM

Vragen over dit artikel

Should I choose the 16 GB module or add a second stick for dual-channel on the ASUS ProArt Z890-CREATOR WiFi?

The board supports dual-channel; adding a second identical 16 GB stick will double bandwidth while keeping DDR5 5600 CL46 1.10 V timings.

What does the 5600 MT/s rating deliver once installed in the ProArt Z890-CREATOR WiFi?

The module runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.10 V, giving the rated throughput without manual tuning.

Does the 288-pin DDR5 UDIMM fit the ProArt Z890-CREATOR WiFi DIMM slots and what speed ceiling applies?

Yes — the 288-pin DDR5 UDIMM matches the board's DDR5 slots; the JEDEC ceiling is 5600 MT/s unless the BIOS enables higher profiles.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.