Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips, no heat spreader, gold edge connector, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 CL46 1.1V 1Rx8 288-Pin UDIMM Supermicro X13SAW-F memory upgrade

SKU CH-KS2X-Z8YCP

16 GB DDR5-5600 UDIMM built for the Supermicro X13SAW-F with CL46 timing and 1.1 V operation

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1.1 V module runs at rated speed
  • Verified fit for Supermicro X13SAW-F with 288-pin UDIMM form factor
  • Built with Samsung, Micron or Hynix OEM chips for tested stability
  • 1Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with US-based technical support included

Exact-match upgrade for Supermicro X13SAW-F

This 16GB DDR5 module is built to the precise specifications the Supermicro X13SAW-F motherboard expects. It operates at 5600MHz with CL46 latency at 1.1V using a 1Rx8 unbuffered layout. The 288-pin UDIMM form factor matches the board's slots exactly.

Suits owners of the named Supermicro board needing

Builders who require ECC error correction, registered modules, SODIMM form factors, or different speeds and voltages should look elsewhere. This kit does not support those configurations. Buyers with other motherboards must verify their own memory population rules before purchasing.

DDR5 5600 (PC5-44800) speed grade

The memory controller on the Supermicro X13SAW-F is designed for this specific data rate and timing. Installing modules rated for a different DDR5 speed grade can prevent the system from booting or force it to run at a lower speed. Matching the PC5-44800 rating ensures the rated performance is achieved.

Puncte forte

  • Exact-match 16 GB DDR5-5600 CL46 1.1 V module runs at rated speed
  • Verified fit for Supermicro X13SAW-F with 288-pin UDIMM form factor
  • Built with Samsung, Micron or Hynix OEM chips for tested stability
  • 1Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with US-based technical support included

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Should I choose the 16GB DDR5 5600MHz CL46 module or a different capacity for my Supermicro X13SAW-F?

The 16GB DDR5 5600MHz CL46 UDIMM is the exact capacity and specification verified for the Supermicro X13SAW-F motherboard, ensuring full recognition and rated speed operation.

What does the 5600MHz PC5-44800 rating mean for actual system performance?

The 5600MHz PC5-44800 rating indicates the module runs at 5600 MT/s with a peak bandwidth of 44800 MB/s, delivering the exact throughput the Supermicro X13SAW-F memory controller expects.

How does the DDR5 288-pin UDIMM interface affect compatibility and speed limits?

The 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAW-F slots precisely; the 1.1V CL46 1Rx8 spec ensures the board operates the module at its full 5600MHz rated speed without downclocking.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.