暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, no heat spreader, gold edge connector, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 CL46 1.1V 1Rx8 288-Pin UDIMM Supermicro X13SAW-F memory upgrade

SKU CH-KS2X-Z8YCP

16 GB DDR5-5600 UDIMM built for the Supermicro X13SAW-F with CL46 timing and 1.1 V operation

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1.1 V module runs at rated speed
  • Verified fit for Supermicro X13SAW-F with 288-pin UDIMM form factor
  • Built with Samsung, Micron or Hynix OEM chips for tested stability
  • 1Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with US-based technical support included

Exact-match upgrade for Supermicro X13SAW-F

This 16GB DDR5 module is built to the precise specifications the Supermicro X13SAW-F motherboard expects. It operates at 5600MHz with CL46 latency at 1.1V using a 1Rx8 unbuffered layout. The 288-pin UDIMM form factor matches the board's slots exactly.

Suits owners of the named Supermicro board needing

Builders who require ECC error correction, registered modules, SODIMM form factors, or different speeds and voltages should look elsewhere. This kit does not support those configurations. Buyers with other motherboards must verify their own memory population rules before purchasing.

DDR5 5600 (PC5-44800) speed grade

The memory controller on the Supermicro X13SAW-F is designed for this specific data rate and timing. Installing modules rated for a different DDR5 speed grade can prevent the system from booting or force it to run at a lower speed. Matching the PC5-44800 rating ensures the rated performance is achieved.

特長

  • Exact-match 16 GB DDR5-5600 CL46 1.1 V module runs at rated speed
  • Verified fit for Supermicro X13SAW-F with 288-pin UDIMM form factor
  • Built with Samsung, Micron or Hynix OEM chips for tested stability
  • 1Rx8 non-ECC unbuffered design matches board memory-population rules
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 16GB DDR5 5600MHz CL46 module or a different capacity for my Supermicro X13SAW-F?

The 16GB DDR5 5600MHz CL46 UDIMM is the exact capacity and specification verified for the Supermicro X13SAW-F motherboard, ensuring full recognition and rated speed operation.

What does the 5600MHz PC5-44800 rating mean for actual system performance?

The 5600MHz PC5-44800 rating indicates the module runs at 5600 MT/s with a peak bandwidth of 44800 MB/s, delivering the exact throughput the Supermicro X13SAW-F memory controller expects.

How does the DDR5 288-pin UDIMM interface affect compatibility and speed limits?

The 288-pin DDR5 UDIMM form factor matches the Supermicro X13SAW-F slots precisely; the 1.1V CL46 1Rx8 spec ensures the board operates the module at its full 5600MHz rated speed without downclocking.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。