暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD23400-818K4 32GB (4x8GB) DDR4-2933 CL21 1.2V 288-pin UDIMM Supermicro X12SAE/X12SCA-F

SKU CH-ZY5P-MDGQF

A 32GB DDR4-2933 CL21 1.2V kit of four 8GB UDIMMs built for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit expands multitasking headroom with four 8 GB modules
  • DDR4-2933 speed matches board spec for full-rated throughput
  • CL21 timing and 1.2 V voltage align with controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE/X12SCA-F slots
  • Major OEM chips tested for stability at rated speed and timing

Exact-fit DDR4-2933 kit for Supermicro boards

This NEMIX RAM kit provides 32 GB across four 8 GB UDIMMs rated at DDR4-2933 (PC4-23400). Each module is non-ECC, unbuffered, 1Rx8 and runs at 1.2 V with CL21 timings. The 288-pin form factor matches the slot layout required by the Supermicro X12SAE and X12SCA-F motherboards.

Verify slot count and population rules first

Check that your board has four DDR4 UDIMM slots and confirm the approved population order in the motherboard manual. Ensure the system BIOS is current and that the platform supports 1Rx8 non-ECC modules at the rated speed and voltage before installation.

Ideal for owners of the named Supermicro boards

This kit suits anyone upgrading a Supermicro X12SAE or X12SCA-F system to the full 32 GB capacity with matched modules. Builders who need ECC, registered DIMMs, a different speed grade or a smaller capacity kit should look at other memory options.

特長

  • 32 GB kit expands multitasking headroom with four 8 GB modules
  • DDR4-2933 speed matches board spec for full-rated throughput
  • CL21 timing and 1.2 V voltage align with controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE/X12SCA-F slots
  • Major OEM chips tested for stability at rated speed and timing

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes inside the MD23400-818K4 kit and is anything else required for installation?

The kit contains four 8 GB DDR4-2933 UDIMM modules for a total of 32 GB. No extra parts are needed; the DIMMs plug directly into the motherboard's 288-pin slots.

Why is this specific 32 GB (4×8 GB) CL21 kit the right choice for the Supermicro X12SAE or X12SCA-F?

It matches the board's required DDR4-2933 speed, 1.2 V voltage, 1Rx8 rank structure and unbuffered non-ECC design, ensuring full-speed recognition without compatibility issues.

What does the DDR4-2933 (PC4-23400) rating mean once the modules are installed in the system?

The memory will run at 2933 MT/s with a CAS latency of 21 cycles at 1.2 V, delivering the rated bandwidth and timing the motherboard's memory controller expects.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。