저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD23400-818K4 32GB (4x8GB) DDR4-2933 CL21 1.2V 288-pin UDIMM Supermicro X12SAE/X12SCA-F

SKU CH-ZY5P-MDGQF

A 32GB DDR4-2933 CL21 1.2V kit of four 8GB UDIMMs built for Supermicro X12SAE and X12SCA-F motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit expands multitasking headroom with four 8 GB modules
  • DDR4-2933 speed matches board spec for full-rated throughput
  • CL21 timing and 1.2 V voltage align with controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE/X12SCA-F slots
  • Major OEM chips tested for stability at rated speed and timing

Exact-fit DDR4-2933 kit for Supermicro boards

This NEMIX RAM kit provides 32 GB across four 8 GB UDIMMs rated at DDR4-2933 (PC4-23400). Each module is non-ECC, unbuffered, 1Rx8 and runs at 1.2 V with CL21 timings. The 288-pin form factor matches the slot layout required by the Supermicro X12SAE and X12SCA-F motherboards.

Verify slot count and population rules first

Check that your board has four DDR4 UDIMM slots and confirm the approved population order in the motherboard manual. Ensure the system BIOS is current and that the platform supports 1Rx8 non-ECC modules at the rated speed and voltage before installation.

Ideal for owners of the named Supermicro boards

This kit suits anyone upgrading a Supermicro X12SAE or X12SCA-F system to the full 32 GB capacity with matched modules. Builders who need ECC, registered DIMMs, a different speed grade or a smaller capacity kit should look at other memory options.

주요 특징

  • 32 GB kit expands multitasking headroom with four 8 GB modules
  • DDR4-2933 speed matches board spec for full-rated throughput
  • CL21 timing and 1.2 V voltage align with controller expectations
  • 1Rx8 unbuffered UDIMM form factor fits Supermicro X12SAE/X12SCA-F slots
  • Major OEM chips tested for stability at rated speed and timing

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What comes inside the MD23400-818K4 kit and is anything else required for installation?

The kit contains four 8 GB DDR4-2933 UDIMM modules for a total of 32 GB. No extra parts are needed; the DIMMs plug directly into the motherboard's 288-pin slots.

Why is this specific 32 GB (4×8 GB) CL21 kit the right choice for the Supermicro X12SAE or X12SCA-F?

It matches the board's required DDR4-2933 speed, 1.2 V voltage, 1Rx8 rank structure and unbuffered non-ECC design, ensuring full-speed recognition without compatibility issues.

What does the DDR4-2933 (PC4-23400) rating mean once the modules are installed in the system?

The memory will run at 2933 MT/s with a CAS latency of 21 cycles at 1.2 V, delivering the rated bandwidth and timing the motherboard's memory controller expects.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.