暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz CL21 1Rx8 1.2V 288-pin UDIMM memory upgrade

SKU CH-5MH9-YRQ5R

8GB DDR4 2933MHz CL21 UDIMM module validated for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity8GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 8GB

  • Exact-match DDR4-2933 upgrade installs at full rated speed
  • Verified fit for Supermicro X12SCQ and X12SCZ-QF motherboards
  • Major OEM chips from Samsung Micron or Hynix ensure tested stability
  • 20 V operation and CL21 timing match controller expectations
  • 288-pin UDIMM form factor with 1Rx8 rank for correct population

Exact-match DDR4 upgrade

This NEMIX RAM module delivers 8GB of DDR4 2933MHz memory built to the PC4-23400 standard with CL21 latency and 1.2V operation. It uses a 1Rx8 rank configuration on a 288-pin UDIMM form factor and is verified for Supermicro X12SCQ and X12SCZ-QF motherboards.

Verify motherboard population rules

Before ordering, consult your system or motherboard manual for supported capacities, approved DIMM population order, and installation steps. The module is non-ECC and unbuffered, so confirm your board accepts this type and that the rank and voltage match the controller requirements.

Fits standard desktop DIMM slots

The 288-pin UDIMM design installs directly into compatible desktop memory slots without requiring ECC or registered module support. It uses major OEM chips from Samsung, Micron, or Hynix tested at rated speed and timing, freeing you from compatibility guesswork while adding capacity to your existing platform.

特長

  • Exact-match DDR4-2933 upgrade installs at full rated speed
  • Verified fit for Supermicro X12SCQ and X12SCZ-QF motherboards
  • Major OEM chips from Samsung Micron or Hynix ensure tested stability
  • 20 V operation and CL21 timing match controller expectations
  • 288-pin UDIMM form factor with 1Rx8 rank for correct population

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-818K1
Capacity8GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the module arrive as a single stick or a kit, and are any extra parts needed for installation?

The package contains one 8GB DDR4 2933MHz UDIMM; no cables, brackets or additional hardware are required for a standard desktop DIMM slot.

Should I pick this 8GB CL21 version or look for a different capacity or latency?

This part is an 8GB single-rank CL21 module validated for Supermicro X12SCQ and X12SCZ-QF boards; choose it when your system manual calls for exactly that capacity, rank and timing.

What does the 2933MHz rating mean once the DIMM is seated in a compatible Supermicro board?

The board's memory controller will recognise the SPD profile and run the module at 2933MHz with CL21 timing at 1.2V, delivering the rated PC4-23400 data rate without manual configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。