Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green circuit boards with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 6400 CL52 ECC RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-56PP-29M8Q

A 192GB DDR5 server memory kit of two 96GB ECC registered DIMMs running at 6400MHz CL52 for the GIGABYTE MS34-CP0 motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Vedeți celelalte 18 configurații
  • 192 GB total capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for fast data throughput
  • CL52 CAS latency at 1.1 V for stable registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard

Exact-match DDR5-6400 RDIMM kit for GIGABYTE

This 192 GB kit contains two 96 GB DDR5-6400 registered ECC modules built to the exact rank, voltage and timing the MS34-CP0 memory controller expects. It targets server administrators who need the full capacity recognised at rated speed without manual tuning.

Fits 288-pin RDIMM slots

The modules use the 288-pin registered RDIMM form factor required by the board, not UDIMM or SODIMM. Registered architecture lets every populated slot run at full capacity while ECC corrects single-bit errors on the fly, reducing silent data corruption and unplanned reboots in production workloads.

Two-module kit simplifies population order

The matched pair arrives as a single kit so the correct 2Rx4 rank configuration is installed together, avoiding population-order mistakes. Buyers who need different capacities or mixed-rank layouts must consult the motherboard manual for approved DIMM sequences before ordering.

Puncte forte

  • 192 GB total capacity with two 96 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for fast data throughput
  • CL52 CAS latency at 1.1 V for stable registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the 6400 MT/s CL52 timing hold steady when all slots are filled on the MS34-CP0?

The kit is spec-matched to the board's memory-population rules and runs at DDR5 6400 with CL52 when populated as directed by the motherboard manual.

What is the typical power draw and thermal behaviour of these 2Rx4 RDIMMs at 1.1 V during continuous server workloads?

Each module operates at 1.10 V without a heat spreader; registered buffering reduces controller load so power and thermals stay within standard DDR5 RDIMM limits for 24/7 operation.

Must the GIGABYTE MS34-CP0 already support 288-pin DDR5 RDIMMs and registered ECC for this kit to function?

Yes, the motherboard must accept 288-pin DDR5 RDIMMs with registered ECC; the kit will not work in UDIMM or SODIMM slots.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.