Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green 288-pin DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 6400 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-7Y2G-TRVW8

A 576 GB DDR5 registered ECC server memory kit of six 96 GB RDIMMs running at 6400 MT/s with CL52 latency and 1.1 V operation, validated for the Gigabyte MS34-CP0 motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Vedeți celelalte 18 configurații
  • Massive 576 GB capacity with six 96 GB modules for memory-hungry workloads
  • DDR5 6400 speed and CL52 latency deliver rated throughput out of the box
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's voltage requirement exactly
  • Verified fit for the GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Exact-match DDR5 RDIMM kit

This NEMIX RAM kit delivers 576 GB of DDR5 memory across six 96 GB registered DIMMs. It operates at 6400 MT/s with CL52 latency at 1.1 V and includes on-die ECC for error correction. The modules use a 288-pin RDIMM form factor built with major OEM DRAM chips.

Suited for fully populated GIGABYTE MS34-CP0 servers

The kit matches the board’s required registered architecture, rank structure, voltage and timing so every slot can be filled at rated speed. Builders using unbuffered UDIMMs, SODIMMs or modules with different voltages or latencies should look elsewhere because the memory controller will not recognise them.

Straightforward installation with population rules

Each DIMM keys into the 288-pin DDR5 slots and the registered buffer reduces electrical load on the controller. The main risk is ignoring the motherboard manual’s approved population order or maximum capacity per channel, which can prevent the system from posting or cause it to run at reduced speeds.

Puncte forte

  • Massive 576 GB capacity with six 96 GB modules for memory-hungry workloads
  • DDR5 6400 speed and CL52 latency deliver rated throughput out of the box
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's voltage requirement exactly
  • Verified fit for the GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this 576GB DDR5 6400 CL52 1.1V ECC RDIMM kit install in my GIGABYTE MS34-CP0 motherboard?

Yes, the 6x96GB 288-pin Registered DIMM kit is verified for the GIGABYTE MS34-CP0 and matches its DDR5 6400 PC5-51200 2Rx4 1.1V requirements.

Can I mix these 96GB 2Rx4 Registered ECC modules with smaller DDR5 RDIMMs already in my server?

The motherboard manual sets the approved population order; mixing ranks or capacities may limit speed or total capacity, so follow the vendor guide.

How do I confirm the kit runs at DDR5 6400 CL52 with ECC active after installation?

Check BIOS memory info for 6400 MT/s, CL52, 1.1V and ECC enabled, then run a full memory test to verify all 576GB report zero corrected errors.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.